Edelbrock

Edelbrock Chevrolet LS1 Pro-Flo 4+ EFI Knock Sensor Harness - 36145

When choosing to upgrade your engine to modern fuel injection, look no further than Edelbrock's Pro-Flo 4 EFI systems. Edelbrock has been delivering the best combination of dyno proven electronic...

Edelbrock Chevy LS Dual Drive By Wire Pro-Flo 4+ EFI Throttle Wiring Harness - 36142

This Harness is a support item necessary for Pro-Flo 4+ EFI Chevy LS Systems running a Dual Drive By Wire Throttle Body. This Harness will plug into the Pro-Flo 4+ Chevy LS Main Engine Harness...

Edelbrock 08-12 MOPAR Gen 3 Hemi Pro-Flo 4 Plus Fuel Injection System - 36140

MAP, O2 and IAT sensors. The Pro-Flo 4+ ECU provides mounting versatility with a compact weather-resistant housing and features a unique self-learning capability that adjusts the fuel map as you...

Edelbrock Chevy BB/SB Pro-Tuner Distributor - Short Tooth - 3614

This Edelbrock Pro Tuner Distributor delivers precise, reliable ignition control for Edelbrock Pro-Flo EFI and EZ Street EFI systems. The 3614 distributor is for Chevy Small & Big Block engines...

Edelbrock Chevrolet LS III Pro-Flo 4+ EFI Knock Sensor Harness - 36135

This Knock Sensor Harness is an auxillary support item for Pro Flo 4 Plus Chevrolet LS 3 EFI Systems. This Harness will plug into the Pro Flo 4 Plus Chevrolet LS 3 Main Engine Harness Connector...

Edelbrock Chevy LS Single Drive By Wire Pro-Flo 4+ EFI Throttle Wiring Harness - 36132

This Harness is a support item necessary for Pro-Flo 4+ EFI Chevy LS Systems running a Single Drive By Wire Throttle Body. This Harness will plug into the Pro-Flo 4+ Chevy LS Main Engine Harness...

Edelbrock Chevy Gen III/IV LS Pro-Flo 4+ EFI Engine Management System - 36130

MAP, O2, and fuel pressure sensors. Note that some supporting wiring harnesses for drive-by-wire and alternator configuration are necessary determined by the reluctor wheel (either 24x or 58x). LS...

Edelbrock Chevy LS 58x Crank/Cam Pro-Flo 4+ EFI Ignition & Engine Position Harness - 36122

This Ignition and Engine Harness is required and sold separately from Pro-Flo 4+ Chevy LS EFI System #36130. This Harness is specifically for Chevy LS 58x Crank Cam Reluctor applications where Crank...

Edelbrock 2013+ MOPAR Gen 3 Hemi Pro-Flo 4 Plus Fuel Injection System - 36120

MAP, O2 and IAT sensors. The Pro-Flo 4+ ECU provides mounting versatility with a compact weather-resistant housing and features a unique self-learning capability that adjusts the fuel map as you...

Edelbrock Chevy LS 24x Crank/Cam Pro-Flo 4+ EFI Ignition & Engine Position Harness - 36112

This Ignition and Engine Harness is required and sold separately from Pro-Flo 4+ Chevy LS EFI System #36130. This Harness is specifically for Chevy LS 24x Crank Cam Reluctor applications where Crank...

Edelbrock Chevy LS Gen III/IV SB Pro-Flo 4 EFI XT-Style Kit - 35993

The Edelbrock part #35993 Pro-Flo 4 XT Sequential Port EFI System for Chevrolet LS GEN III/IV engines is equipped with the latest in technology and features. The EFI system comes complete with a...

Edelbrock Pro Flo 4 EFI System Seq Port Ford 351W 625 Max HP 35lb/hr Satin Finish - 35950

The Edelbrock part #35950 Pro-Flo 4 EFI System for Small-Block Ford 351W C.I. engines is equipped with the latest in technology and features. The EFI system comes complete with a traditional...

Edelbrock Chevy LS Gen III/IV Rectangle Port Pro-Flo 4 EFI XT-Style Kit - 35893

The Edelbrock part #35893 Pro-Flo 4 XT EFI System for LS Gen III/IV Chevy Rectangle Port engines has the latest in technology and features. The EFI system comes complete with a Pro-Flo XT intake...

Edelbrock Pro Flo 4 XT EFI System Seq Port SBC Vortec/E-Tec 550 Max HP 29lb/hr Satin Finish - 35820

The Edelbrock part #35820 Pro-Flo 4 XT Sequential Port EFI System for Small-Block Chevy engines with Vortec/E-Tec Cylinder heads has the latest technology and features. The EFI system comes complete...

Edelbrock Pro Flo 4 EFI System Seq Port Chrysler Gen II Hemi 426-572 950 Max HP 60lb/hr Satin Finish - 35670

Pro-Flo 4 Dual-Quad HEMI EFI System #35670 is intended for use with1964-71 Mopar Gen II 426-572 HEMI engines operating in the 2,500-6,500+ RPM range. This EFI incorporates a single-plane Air-Gap...

Edelbrock EZ-Street TBI EFI Regulator Kit Return Style - 58psi - 35631

Edelbrock Fuel Pressure Regulator kit #35631 features a unique design that allows it to be mounted directly to the EZ Street TBI body fuel inlet which eliminates the hassle of locating a mounting...

Edelbrock Engine Control Unit (ECU) For Pro-Flo 4 - 3543

For those of you who are running a Pro-Flo 4 EFI on your vehicle and have a damaged ECU, Edelbrock is now offering a replacement unit. Engine Control Unit (ECU) #3543 for the Pro-Flo 4 is a new...

Edelbrock Manifold Absolute Pressure Sensor Upgrade For ProFlo4 Boosted Applications - 3542

Edelbrock 2-Bar MAP Sensor is an upgrade component for use with ProFlo4 Boosted Applications. Increases The MAP Sensor operating range.

Edelbrock ProFlo4 EFI Fuel Pump Relay For High Current Fuel Pumps 12V 30-Amp - 3534

Edelbrock part #3534 is a supplemental Fuel Pump Relay Harness for ProFlo4 EFI systems.

Edelbrock Fuel Injector Harness Adapter Multec 2 To EV1 - 3533

Edelbrock part #3533 Injector Harness Adapter Multec II to EV1 adapters allow you to use injectors having Multec II injector connectors on engines originally equipped with square Bosch EV1 style...

Edelbrock Fuel Injector 80 Lb/Hr Short Body - Set of 8 - 3522

Edelbrock part #3522 is a set of (8), short body Siemens Deka High Impedance (12.5 ohms) fuel injector with a flow rate of 80 lb/hr (830cc) @ 43.5psi.

Edelbrock Precision-Flow Fuel Injector (42 lb/hr) - Set of 8 - 3295

These new Precision-Flow high-impedance fuel injectors deliver the outstanding idle quality, unparalleled flow consistency, and durability essential for high-performance EFI applications. With a flow...

Edelbrock Precision-Flow Fuel Injector (42 lb/hr) - 3294

These new Precision-Flow high-impedance fuel injectors deliver the outstanding idle quality, unparalleled flow consistency, and durability essential for high-performance EFI applications. With a flow...

Edelbrock AMC 290-401 Fuel Injection Fuel Rail - Use w/ Part #28105 & #28115 - 3210

All Edelbrock fuel rails are machined from high quality extruded aluminum. Each kit includes fuel rails, stands and mounting hardware. Fuel fittings, crossover line and regulator not included. 3210...