Edelbrock

Edelbrock Pro Flo 4 EFI System Seq Port Chrysler Gen II Hemi 426-572 950 Max HP 60lb/hr Satin Finish - 35670

Pro-Flo 4 Dual-Quad HEMI EFI System #35670 is intended for use with1964-71 Mopar Gen II 426-572 HEMI engines operating in the 2,500-6,500+ RPM range. This EFI incorporates a single-plane Air-Gap...

Edelbrock Pro-Flo2 Calibration Module All Pro Flo Products (Replacement or Service Item) - 35360

The Edelbrock 35360 is a new calibration module that will be a replacement or service part for any Pro-Flo kit. Calibration Module now has back lighting and has been updated to be immune to RF and...

Edelbrock Fuel Rail Lsr Victor for 28235 - 3510

Designed for use with Edelbrock Super Victor LS-R intake manifold #2823/#28235. These fuel rails are machined from high quality extruded aluminum with -8 AN inlets/outlets and feature a clear...

Edelbrock Olds Heater Plug 1Pr - 2733

Edelbrock part #2733 Oldsmobile Replacement Cast iron Exhaust Crossover Plugs. These steel plugs are furnished with each Performer 455 manifold and must be installed in the exhaust crossover port in...

Edelbrock STD-Flange Carb Plate - 2732

The Edelbrock Square-Bore to Spread-Bore Adapter #2732 adapts square-bore carbs to spread-bore carb pad on Edelbrock intakes.

Edelbrock Spread-Bore Carb Plate - 2731

The Edelbrock Square-Bore Adapter Plate #2731 adapts spread-bore carbs to Edelbrock manifolds without regular mounting flange.

Edelbrock Carb to Q-Jet Adapter Kit - 2697

The Edelbrock Square-bore Carb to Spread-bore Manifold Adapter #2697 is designed to allow installation of the Edelbrock Performer Series carburetor on vehicles with the OEM (original equipment)...

Edelbrock Sq Bore to Q-Jet Adapter - 2696

The Edelbrock Square-bore Carb to Spread-bore Manifold Adapter #2696 is designed to allow installation of the Edelbrock Performer Series carburetor on vehicles with the OEM (original equipment)...

Edelbrock Standard Flang Sideways Mount Adapter - 2694

The Edelbrock Standard-Flange Sideways Adapters #2694 mounts standard-flange Holley carbs sideways on Tunnel Rams. The Edelbrock #2694 Sideways Adapters are sold in a pair.

Edelbrock Victor Q-Jet Adapter - 2693

The Edelbrock Carburetor Adaptor #2693 competition adapter re-locates Q-Jet carbs 5/16" to the rear for improved fuel distribution on square-bore single plane intake manifolds.

Edelbrock Spread-Bore Adapter - 2692

The Edelbrock Carburetor Adaptor #2692 is designed mounts 4-bbl. Rochester Quadra jet carburetors to square-bore, single plane intake manifolds.

Edelbrock Thermo-Quad Adapter - 2691

The Edelbrock Carburetor Adaptor #2691 is designed mounts 4-bbl. Carter Thermo-Quad carburetors to square-bore, single plane intake manifolds.

Edelbrock 96-17 Chevy 4.3 V6 Vortec Marine Engine Performer Series Intake Manifold w/8 Bolts - 2519

Edelbrock part #2519 Performer Vortec V6 Marine Intake Manifold is based on the powerful Edelbrock #2111. This dual-plane intake is designed for the engine swap market utilizing 1985 and later Chevy...

Edelbrock Buick B4 B Manifold - 2515

Edelbrock part #2515 Buick B-4B intake manifold is a resurrection of the popular B-4B manifold made in the late 1960s for street 400-430-455 c.i.d. Buick V8's. The only change to the original design...

Edelbrock Racing Fender Cover - PVC Foam Mat - 2 Color Printed Edelbrock Racing Logo - 2324

Edelbrock #2324 fender covers are made from a strong PVC foam with a reinforced with nylon mesh. They're impervious to motor oil, coolant, lacquer thinner, brake fluid, etc. The non-slip material...

Edelbrock Max-Fire Distributor 61-80 Buick 215/350 V8 - 22759

Edelbrock part #22759 Max-Fire distributor for 1961-1980 Buick 215-350 V-8 engines is ready to run right out-of-the-box and are the perfect upgrade for your ignition system. They're ideal for...

Edelbrock Max-Fire Distributor Chevrolet 348/409 - 22752

Edelbrock part #22752 Max-Fire distributor for Chevy 348/409 engines is ready to run right out-of-the-box and are the perfect upgrade for your ignition system. They're ideal for replacing or...

Edelbrock Spark Plug Wire Set GM LS Engines Heat Shields w/o Red Wire (Set of 8) - 22717

Edelbrock Max-Fire LS Ignition Wire Kits #22717 is a preassembled set of eight spark plug wires for General Motors LS engines. These wires are manufactured using high-quality materials to ensure the...

Edelbrock Spark Plug Wire Set Universal 90 Deg Boots 50 Ohm Resistance 8 65mm Red Wire (Set of 9) - 22711

The Edelbrock #22711 Max-Fire Universal Ultra-Spark 50 spark plug wire sets feature the same high quality as our model specific sets, but give you the flexibility to tailor them to fit your V8...

Edelbrock Spark Plug Wire Set Universal Flex Boots 50 Ohm Resistance 8 65mm Red Wire (Set of 9) - 22710

The Edelbrock #22710 Max-Fire Universal Ultra-Spark 50 spark plug wire sets feature the same high quality as our model specific sets, but give you the flexibility to tailor them to fit your V8...

Edelbrock Spark Plug Wire Set Universal 90 Deg Boots 500 Ohm Resistance 8 65mm Black Wire (Set of 9) - 22701

The Edelbrock #22701 Max-Fire Universal Ultra-Spark 500 spark plug wire sets feature the same high quality as our model specific sets, but give you the flexibility to tailor them to fit your V8...

Edelbrock Spark Plug Wire Set Universal Flex Boots 500 Ohm Resistance 8 65mm Black Wire (Set of 9) - 22700

The Edelbrock #22700 Max-Fire Universal Ultra-Spark 500 spark plug wire set features the same high quality as our model specific sets, but give you the flexibility to tailor them to fit your V8...

Edelbrock Performer Buick 455 Manifold - 2146

Edelbrock part #2146 Performer Buick 455 intake manifold is designed for street 400-430-455 c.i.d. Buick V8's. Manifold not equipped with EGR. Will fit cold air induction hoods. Will not fit Buick...

Edelbrock 435Hp Total Power Package Top-End Kit for Use On 1955 And Later SB-Chevy - 2099

Edelbrock part #2099 Performer RPM Top End Kit is designed for 1957-86 Small-Block Chevy 327-350 V-8 engines. This Top End Kit produced 435 HP & 435 TQ on a 350 c.i.d engine with 9.5:1 compression...