Edelbrock

Edelbrock Tensioner Upgrade Kit for 1597 - 15028

Edelbrock Part #15028 Tensioner Upgrade Kit is engineered to handle the increased belt stress encountered in high horsepower Edelbrock applications. This kit is an upgrade for part #1597 Edelbrock...

Edelbrock Lid Gaskets Eps - 1499

The Edelbrock #1499 air horn gasket is placed in between the carburetor lid and base upon lid installation. The set comes with a total of 5 gaskets.

Edelbrock Replacement Needle and Seat 0935In - 1498

The Edelbrock #1498 are replacement Needles and Seats for all Edelbrock square-bore carburetors

Edelbrock Idle Mixture Screw Set - 1496

The Edelbrock Idle Mixture Screw Set #1496 includes a pair of idle mixture screws and springs for all Edelbrock square bore carburetors.

Edelbrock Cable Plate 429 / 460 - 1495

The Edelbrock #1495 throttle cable plate kit was designed for 429-460 Fords with cable activated throttle and automatic transmission kickdown rods. The Edelbrock #1495 throttle cable plate kit...

Edelbrock Choke Cable Bracket and Clamp Assembly for Edelbrock Carburetors - 1494

The Edelbrock Carburetor Choke Cable Bracket & Clamp assembly #1494 provides users with a means of holding a manual choke cable in place upon attaching the cable pull to the carburetor. The kit...

Edelbrock Cable Plate 351M / 400 - 1493

The Edelbrock #1493 throttle cable plate kit was designed for 351C, 351M/400 Fords with cable activated throttle and automatic transmission kickdown rods. The Edelbrock #1493 throttle cable plate kit...

Edelbrock Cable Plate 351-W - 1491

The Edelbrock #1491 throttle cable plate kit was designed for 351W Fords with cable activated throttle and automatic transmission kickdown rods. The Edelbrock #1491 throttle cable plate kit...

Edelbrock Jet / Rod Kit for 1411 - 1489

Performer Carburetor Calibration Kit #1489 for #1411 Carburetors

Edelbrock Jet / Rod Kit for 1409 - 1488

Performer Carburetor Calibration Kit #1488 for #1409 Carburetors

Edelbrock Jet / Rod Kit for 1403/1404 - 1486

Edelbrock Performer EPS 1403, 1404 and Thunder Series AVS 1801, 1802, 1803 and 1804 Thunder Series AVS carburetor calibration kit

Edelbrock 4 3L Marine Calibration Kit - 1485

Edelbrock Marine Series 1409 carburetor calibration kit when installed on a 4.3L 90 Deg V6

Edelbrock Cruise Control - Chevy - 1484

Edelbrock part #1484 Chevrolet/GMC Cruise Control Kit is needed when using an Edelbrock carburetor on Chevrolet/GMC vehicles equipped with cruise control. The Edelbrock #1484 allows the installation...

Edelbrock Throttle Lever Kit - Chrysler - 1481

Chrysler:Small-Block LA-Series:273 (4.5L)/318 (5.2L)/340 (5.6L)/360 (5.9L);Chrysler:Big-Block B-Series:361 (5.9L)/383 (6.3L)/400 (6.6L);Chrysler:Big-Block RB-Series:413 (6.8L)/426 (7.0L)/440 (7...

Edelbrock Jet / Rod Kit for 1407/1410/1412/1413 - 1480

Performer Carburetor Calibration Kit #1480 for #1407; #1410; #1412; #1413 Carbs

Edelbrock Jet / Rod Kit for 1405 - 1479

Performer Carburetor Calibration Kit #1479 for #1405 Carburetors

Edelbrock Electric Choke Kit - 1478

The Edelbrock Electric Choke Kit #1478 is designed to convert manual choke Edelbrock Performer series carburetor to electric choke. This kit includes all necessary parts to convert #1404, #1405,...

Edelbrock Master Rebuilding Kit - 1477

The Edelbrock 1477 rebuild kit is a complete kit that is needed to rebuild any Edelbrock square-bore carburetor.

Edelbrock Choke Cap/Gskt/Screws - 1474

The Edelbrock #1474 Choke Cap Kit includes all the components needed to replace the existing choke cap on all Edelbrock square bore carbs.

Edelbrock Linkage Assortment for Eps Carbs - 1473

The Edelbrock Performer Series (EPS) Linkage Kit (Includes 1 ea. of 7 Links and 6 Retaining Clips)

Edelbrock Air Horn/Main Gskt Kit Eps - 1472

The Edelbrock #1472 Gasket set is a complete set of gaskets for the EPS, AVS and AVS II series of Edelbrock carburetors.

Edelbrock Float and Hinge Pin 2-Ea - 1469

Edelbrock #1469 EPS And Thunder?Series AVS Float kit ?(Includes Two Floats, Two Pins And A Float Setting Gauge)?

Edelbrock Needle and Seat 110 2-Ea High Flow - 1466

The Edelbrock #1466 High Flow Needle and Seats includes a pair of needles and .110" seats. The Edelbrock #1466 High Flow Needle and Seats are designed for use in all Edelbrock square-bore carburetors.

Edelbrock Offroad NandS 0935 2-Ea - 1465

The Edelbrock #1465 Off-Road Needles and Seats includes a pair of spring loaded needles and .0935" seats. The Edelbrock #1465 Off-Road Needles and Seats help maintain proper float level in rough...