Edelbrock

Edelbrock Coil Cover Kit for E-Force Supercharger 2005-2010 Chrysler Hemi - 41113

Edelbrock part #41113 aluminum coil covers are designed for the 2005-10 Chrysler HEMI's with an Edelbrock supercharger. Our kit is geared towards those with competition versions of the supercharger...

Edelbrock Pro Flo XT 90mm Throttle Body - Satin Finish - 3970

Constructed from billet aluminum, the new Edelbrock 90mm Victor Series Pro-Flo XT(TM) Throttle Body, complete with TPS and IAC, maximizes performance upgrades on all Pro-Flo XT, EFI Victor Elbow, and...

Edelbrock GM Upgrade For Pro-Flo 3 To Pro-Flo 4 Idle Air Control Motor Adapter - 3855

Edelbrock Idle Air Control Adapter Kit is required to install a GM-Style Stepper IAC Motor in place of an existing Hitachi PWM IAC. Allows for upgrade from ProFlo3 to ProFlo4.

Edelbrock Fuel Injector Siemens 60 lb/hr - Sold Individually - 3696

3696 is sold individually, Short Body Siemens High Impedance (12.5 ohms) Fuel Injector with a flow rate of 60 lb/hr (630cc) @43.5psi. These injectors measure 37.25mm O-ring to O-ring centerline,...

Edelbrock Ignition Control Kit E-Street EFI II Pontiac 326-455 - 3681

Now you can get the ultimate control of your engine when using the expanded ignition timing control feature of E-Street 2 EFI. This new feature gives you the ability to easily adjust your ignition...

Edelbrock Ignition Control Kit E-Street EFI II Chrysler SB 318-360 - 3680

Now you can get the ultimate control of your engine when using the expanded ignition timing control feature of E-Street 2 EFI. This new feature gives you the ability to easily adjust your ignition...

Edelbrock Ignition Control Kit E-Street EFI II AMC 1967-1969 343-390 - 3679

Now you can get the ultimate control of your engine when using the expanded ignition timing control feature of E-Street 2 EFI. This new feature gives you the ability to easily adjust your ignition...

Edelbrock Ignition Control Kit E-Street EFI II Chrysler Rb 440 - 3678

Now you can get the ultimate control of your engine when using the expanded ignition timing control feature of E-Street 2 EFI. This new feature gives you the ability to easily adjust your ignition...

Edelbrock 289-302 Short Tooth Pro-Tuner Distributor - 3675

Now you can get the ultimate control of your engine when using the expanded ignition timing control feature of E-Street 2 EFI. This new feature gives you the ability to easily adjust your ignition...

Edelbrock Ignition Control Kit E-Street EFI II Chevy - 3674

Now you can get the ultimate control of your engine when using the expanded ignition timing control feature of E-Street 2 EFI. This new feature gives you the ability to easily adjust your ignition...

Edelbrock Fuel Rail Kit Chrysler Gen II 426-572 Hemi for Use w/ 75245 - 3660

All Edelbrock fuel rails are machined from high quality extruded aluminum. Each kit includes fuel rails, stands and mounting hardware. Fuel fittings, crossover line and regulator not included. 3660...

Edelbrock Chrysler Gen III HEMI 5.7L/6.1L/6.4L EFI Fuel Rail Kit (For 7179) - 3647

The Edelbrock #3647 Fuel Rail is designed to fit the #7179 GEN III HEMI Victor II Intake Manifold. This kit utilizes our standard, ribbed extrusion fuel rails and they are black anodized with machine...

Edelbrock MOPAR Gen 3 Hemi Pro-Flo 4 Plus EFI System Knock Sensor Harness - 36175

This Knock Sensor Harness is an auxillary support item for Pro-Flo 4+ Mopar Hemi Gen III EFI Systems. This Harness will plug into the Pro-Flo 4+ Mopar Hemi Gen III Main Engine Harness Connector...

Edelbrock 15-17 Ford Coyote Pro-Flo 4+ EFI Engine Management System - 36160

MAP, O2 and IAT sensors. The compact Pro-Flo 4+ ECU provides mounting versatility with a weather-resistant housing and features a unique self-learning capability that adjusts the fuel map as you...

Edelbrock Chevy LS Using a 4-Pin Alternator Pro-Flo 4+ EFI Wiring Harness - 36155

This Sensor and Output Harness is a support item necessary for Pro-Flo 4+ Chevy LS EFI Systems running a 4-Pin Alternator. This Harness will plug into assorted sensors and alternator on the engine,...

Edelbrock 05-07 MOPAR Gen 3 Hemi Pro-Flo 4 Plus Fuel Injection System - 36150

MAP, O2, and fuel pressure sensors. The Pro-Flo 4+ ECU provides mounting versatility with a compact weather-resistant housing and features a unique self-learning capability that adjusts the fuel map...

Edelbrock Chevrolet LS1 Pro-Flo 4+ EFI Knock Sensor Harness - 36145

When choosing to upgrade your engine to modern fuel injection, look no further than Edelbrock's Pro-Flo 4 EFI systems. Edelbrock has been delivering the best combination of dyno proven electronic...

Edelbrock Chevy LS Dual Drive By Wire Pro-Flo 4+ EFI Throttle Wiring Harness - 36142

This Harness is a support item necessary for Pro-Flo 4+ EFI Chevy LS Systems running a Dual Drive By Wire Throttle Body. This Harness will plug into the Pro-Flo 4+ Chevy LS Main Engine Harness...

Edelbrock 08-12 MOPAR Gen 3 Hemi Pro-Flo 4 Plus Fuel Injection System - 36140

MAP, O2 and IAT sensors. The Pro-Flo 4+ ECU provides mounting versatility with a compact weather-resistant housing and features a unique self-learning capability that adjusts the fuel map as you...

Edelbrock Chevy BB/SB Pro-Tuner Distributor - Short Tooth - 3614

This Edelbrock Pro Tuner Distributor delivers precise, reliable ignition control for Edelbrock Pro-Flo EFI and EZ Street EFI systems. The 3614 distributor is for Chevy Small & Big Block engines...

Edelbrock Chevrolet LS III Pro-Flo 4+ EFI Knock Sensor Harness - 36135

This Knock Sensor Harness is an auxillary support item for Pro Flo 4 Plus Chevrolet LS 3 EFI Systems. This Harness will plug into the Pro Flo 4 Plus Chevrolet LS 3 Main Engine Harness Connector...

Edelbrock Chevy LS Single Drive By Wire Pro-Flo 4+ EFI Throttle Wiring Harness - 36132

This Harness is a support item necessary for Pro-Flo 4+ EFI Chevy LS Systems running a Single Drive By Wire Throttle Body. This Harness will plug into the Pro-Flo 4+ Chevy LS Main Engine Harness...

Edelbrock Chevy Gen III/IV LS Pro-Flo 4+ EFI Engine Management System - 36130

MAP, O2, and fuel pressure sensors. Note that some supporting wiring harnesses for drive-by-wire and alternator configuration are necessary determined by the reluctor wheel (either 24x or 58x). LS...

Edelbrock Chevy LS 58x Crank/Cam Pro-Flo 4+ EFI Ignition & Engine Position Harness - 36122

This Ignition and Engine Harness is required and sold separately from Pro-Flo 4+ Chevy LS EFI System #36130. This Harness is specifically for Chevy LS 58x Crank Cam Reluctor applications where Crank...