COMP Cams

COMP Cams Crank Socket Comp LS1/LS6 in - 4914CPG

The COMP crankshaft socket for GM LS GEN III/IV is the last crankshaft socket that you'll need. Featuring a 1/2" drive socket and a knurled nut, our socket is designed for use with a degree wheel.

COMP Cams 5in Extension - 4912CPG

This 5" tip extension for dial indicators allows you to use your dial indicator in tight spaces that require a longer reach.

COMP Cams 6in Extension - 4911CPG

This 6" tip extension for dial indicators allows you to use your dial indicator in tight spaces that require a longer reach.

COMP Cams 1in Dial Indicator - 4909CPG

Compatibile with all COMP tools that require a dial indicator, our 0 to 1.00" travel dial indicator features a lug back, 3/8" shaft, 0-100 face and a revolution counter. We offer tip extensions for...

COMP Cams 6in Dial Calipers - 4908CPG

Dial calipers are a must-have for any hotrodder. These analog dial calipers measure up to 6" in .001" increments and feature smooth thumb rollers, a protective case and a rigid stainless steel body.

COMP Cams Magnetic Base Setup - 4907CPG

This dial indicator magnetic base allows you to mount a dial indicator anywhere on your engine.

COMP Cams Bracket For Spring Checker - 4903CPG

COMP Cams Bracket For Spring Checker

COMP Cams Cam Fixture Valve W/Metric A - 4902CPG

This COMP fixture is essential for any engine project where valvetrain measurements are required. Our tool screws into both 1/4"-20 and 6mm valve cover bolt holes and holds a dial indicator for...

COMP Cams Cam Fixture Block - 4901CPG

This COMP fixture is essential for any engine project where valvetrain measurements are required. Our tool screws into both 1/2" and 7/16" bolt holes and holds a dial indicator for measuring lifter...

COMP Cams Magnetic Deck Checker - 4900

Our magnetic deck checker allows for the easy mounting of a dial indicator to check piston travel. Magnets in this deck plate make mounting a dial indicator easier than using a head bolt mounted deck...

COMP Cams Guide Plates GM LS1 3/8 Flat - 4856-8

Hardened and black oxide coated for durability, this flat one-piece guide plate set is designed for GM LS engines with 8mm studs and 3/8" pushrods.

COMP Cams Guide Plate GM LS1 3/8 Flat - 4856-1

Hardened and black oxide coated for durability, this flat one-piece guide plate is designed for GM LS engines with 8mm studs and 3/8" pushrods.

COMP Cams Guide Plates GM LS1 5/16 Flat - 4854-8

Hardened and black oxide coated for durability, this flat one-piece guide plate set is designed for GM LS engines with 8mm studs and 5/16" pushrods.

COMP Cams Guide Plate GM LS1 5/16 Flat - 4854-1

Hardened and black oxide coated for durability, this flat one-piece guide plate is designed for GM LS engines with 8mm studs and 5/16" pushrods.

COMP Cams Guide Plates LS3 Raised 5/16in - 4840-8

Hardened and black oxide coated for durability, this flat one-piece guide plate set is designed for GM LS3/L92 engines with 8mm studs and 5/16" pushrods.This Part...

COMP Cams Guide Plate LS3 Raised 5/16in - 4840-1

Hardened and black oxide coated for durability, this flat one-piece guide plate is designed for GM LS3/L92 engines with 8mm studs and 5/16" pushrods.This Part...

COMP Cams Guide /CS 3/8in Flat A - 4839-8

Hardened and black oxide coated for durability, this flat two-piece adjustable guide plate set is designed for Chevrolet 265-400 Small Block and Ford 289-351W engines with 7/16" studs and 3/8"...

COMP Cams Guide Plate FS/CS 3/8in Flat A - 4839-1

Hardened and black oxide coated for durability, this flat two-piece adjustable guide plate is designed for Chevrolet 265-400 Small Block and Ford 289-351W engines with 7/16" studs and 3/8" pushrods.

COMP Cams Guide Plate FF 3/8 Raised - 4838-1

Hardened and black oxide coated for durability, this raised one-piece guide plate is designed for Ford 429-460 engines with 7/16" studs and 3/8" pushrods.

COMP Cams Guide Plate FS/CS 5/16in Flat - 4835-1

Hardened and black oxide coated for durability, this flat two-piece adjustable guide plate is designed for Chevrolet 265-400 Small Block and Ford 289-351W engines with 7/16" studs and 5/16" pushrods.

COMP Cams Guide Plates FF 5/16 Raised - 4834-8

Hardened and black oxide coated for durability, this raised one-piece guide plate set is designed for Ford 429-460 engines with 7/16" studs and 5/16" pushrods.

COMP Cams Guide Plate FF 5/16 Raised - 4834-1

Hardened and black oxide coated for durability, this raised one-piece guide plate is designed for Ford 429-460 engines with 7/16" studs and 5/16" pushrods.

COMP Cams Guide Plates CB 7/16 - 4820-8

Hardened and black oxide coated for durability, this raised one-piece guide plate set is designed for Chevrolet 396-454 Big Block engines with 7/16" studs and 7/16" pushrods.

COMP Cams Guide Plates FS 3/8 (Flat) - 4818-8

Hardened and black oxide coated for durability, this flat one-piece guide plate set is designed for Ford 289-351W engines with 7/16" studs and 3/8" pushrods.