COMP Cams

COMP Cams Socket For CB Crank - 4797CPG

The COMP crankshaft socket for Chevrolet Big Block is the last crankshaft socket that you'll need. Featuring a 1/2" drive socket and a knurled nut, our socket is designed for use with a degree wheel.

COMP Cams ProFEssional Degree Kit - 4796CPG

Complete with a DVD, a pair of 4758 checking springs, 4790 9" degree wheel, 4794 degree wheel pointer, 4795 14mm piston stop, 4902 fixture, and 4909 dial indicator, this kit contains everything...

COMP Cams Bolt 14MMx1.25 Piston Stop - 4795CPG

Designed for heads-on applications, this piston stop features 14mm thread for use in most engines.

COMP Cams Pointer Degree Wheel - 4794CPG

This pointer is designed for use with a camshaft degree wheel. As the degree wheel turns, this pointer stays in place and indicates the position of the engine cycle.

COMP Cams Socket For CS Crank - 4793CPG

The COMP crankshaft socket for Chevrolet Small Block, 90 degree V6, GM 4 cyl and Ford 4.6 is the last crankshaft socket that you'll need. Featuring a 1/2" drive socket and a knurled nut, our socket...

COMP Cams Degree Wheel - 4790CPG

The 9.5" Sportsman degree wheel is perfect for degreeing a cam when extra room is available. With a simple, clean design, our wheel is easy to read, and can also be used on most balancers or COMP...

COMP Cams Crank Gear Install Tool - 4789CPG

This crankshaft gear installation tool is designed for use with our 4920 harmonic balancer installation kit for professionally installing a timing gear on crankshafts.

COMP Cams Degree Wheel Comp 7.5in - 4787CPG

The 7.5" Sportsman degree wheel is perfect for degreeing a cam in tight confines such as an engine compartment. With a simple, clean design, our wheel is easy to read, and can also be used on most...

COMP Cams ID Spring Seat 1.50 X 585 X 69 - 4770-1

Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4770 features a 1.500" OD and a .585" ID that works well with our 985,...

COMP Cams Degree Cam Bushing Set - 4760CPG

A degree bushing is essential to getting your valve timing correct when you install and degree your cam. Our degree bushing kit includes 0, 2, 4, 6 and 8 degree bushings.

COMP Cams Checking Springs - 4758-2

Checking springs are essential for any engine project. Whether you're checking piston to valve clearance, rocker ratio, valve lift, degreeing a cam or measuring for pushrod length, checking springs...

COMP Cams Checking Spring - 4758-1

Checking springs are essential for any engine project. Whether you're checking piston to valve clearance, rocker ratio, valve lift, degreeing a cam or measuring for pushrod length, checking springs...

COMP Cams Spring Shim Kit 1.500 - 4757CPG

This COMP shim kit includes a number of 1.500" diameter shims of various thickness. This kit includes 16 .015" thick shims, 16 .030" thick shims and 16 .060" thick shims.

COMP Cams Spring Shim Kit 1.640 - 4756CPG

This COMP shim kit includes a number of 1.640" diameter shims of various thickness. This kit includes 16 .015" thick shims, 16 .030" thick shims and 16 .060" thick shims.

COMP Cams Spring Shim Kit 1.480 - 4755CPG

This COMP shim kit includes a number of 1.480" diameter shims of various thickness. This kit includes 16 .015" thick shims, 16 .030" thick shims and 16 .060" thick shims.

COMP Cams Spring Shim Kit 1.437 - 4754CPG

This COMP shim kit includes a number of 1.437" diameter shims of various thickness. This kit includes 16 .015" thick shims, 16 .030" thick shims and 16 .060" thick shims.

COMP Cams Spring Shim Kit 1.250 - 4753CPG

This COMP shim kit includes a number of 1.250" diameter shims of various thickness. This kit includes 16 .015" thick shims, 16 .030" thick shims and 16 .060" thick shims.

COMP Cams 1.580 Spring Seat Cutter - 4735CPG

This valve seat cutter allows you to enlarge the cylinder head spring pocket to 1.580" outer diameter while reducing the outer diameter of the valve guide to .560".

COMP Cams 3/8 Arbor (For Cutters) - 4734

This arbor is designed to center a spring seat or valve guide cutter in applications with a 3/8" valve.

COMP Cams 1.440 Spring Seat Cutter - 4733CPG

This valve seat cutter allows you to enlarge the cylinder head spring pocket to 1.440" outer diameter while reducing the outer diameter of the valve guide to .560".

COMP Cams 5/16 Arbor (For Cutters) - 4730CPG

This arbor is designed to center a spring seat or valve guide cutter in applications with a 5/16" valve.

COMP Cams Valve Guide Cutter For .625 O - 4728CPG

Our valve guide cutter is designed to cut the outside diameter of the valve guide to .625".

COMP Cams Valve Guide Cutter For .446 O - 4727CPG

Our valve guide cutter is designed to cut the outside diameter of the valve guide to .446".

COMP Cams Valve Guide Cutter For .530 O - 4726CPG

Our valve guide cutter is designed to cut the outside diameter of the valve guide to .530".