Radium Engineering

Radium Engineering Universal Air Oil Separator (AOS-R) - 20-0819

This air/oil separator is designed to collect crankcase gasses and allow collected oil to drain back into the engine via gravity. Gasses are then vented to the atmosphere out the top of the AOS VTA...

Radium 2-Way Threaded Hose Separator Clamp - 20-0817

Single clamp with two positions. Anodized aluminum.

Radium RB25DET 10AN Male Press-In Valve Cover Fitting - Intake & Exhaust Side - 20-0813

This fitting presses into the Nissan RB25DET valve cover and will work on either intake or exhause side. Presents a swiveling 10AN male fitting for connecting a hose to.

Radium KA24DE Valve Cover Intake 10AN Male Press-Fit Fitting - 20-0810

Press-in fitting breather fitting for the Nissan KA24DE valve cover. 10AN male swivels 360 degrees. Stainless steel and aluminum construction.

Radium RB26DETT Valve Cover Intake and Exhaust 12AN Male Press-Fit Fitting - 20-0809

Press-in swivel fitting with 12AN male. For use on the Nissan RB26DETT engine valve covers.

Radium Engineering S14/S15 RB25DET/SR20DET 10AN Press-In Valve Cover Banjo Fitting Intake Port - 20-0808

This stainless steel and aluminum fitting presses into the S14/S15 Nissan SR20DET valve cover on the intake side and replaces the PCV valve with a high flowing vent-to-atmosphere swiveling 10AN male...

Radium Fuel Hanger FPR Block Off - 20-0806

This kit allows decomissioning of Radium built-in pressure regulators in certain Radium fuel pump hangers. This allows the user to convert to a return system if they desire. Check with Radium...

Radium Engineering Pump Outlet Adapter - Check Valve - 10mm Barb - 20-0798

Attaches to specific fuel pump outlet barbs. Integrated check valve. 10mm Hose barb male connection. See www.radiumauto.com for more information.

Radium Engineering 05-13 Chevrolet Corvette Fluid Lock Dual Catch Can Kit - 20-0787-FL

Dual catch can kit for the 2005-2013 Chevrolet Corvette. Interfaces with crankcase vent hose and PCV line to intercept oil and other contaminants a keep them from reaching the induction system...

Radium Engineering 05-13 Chevrolet Corvette Fluid Lock CCV Catch Can Kit - 20-0786-FL

Single catch can kit for the 2005-2013 Chevrolet Corvette. Interfaces with crankcase vent hose to intercept oil and other contaminants a keep them from reaching the induction system. Featuring...

Radium Engineering GM LS2/LS3/LS7 Engine Fluid Lock PCV Catch Can Kit - 20-0785-FL

Single catch can kit for GM LS2, LS3, LS7 engines. Mounts to engine, so this kit can be used with any vehicle featuring one of the compatible engines. Features Radium's patented Fluid Lock catch can...

Radium Engineering Injector Hat Adapter 11mm to 14mm O-ring 13mm Extension - 20-0779

Radium Engineering Injector Hat Adapter 11mm to 14mm O-ring 13mm Extension

Radium Engineering Injector Seat Adapter 14mm to 17mm O-ring 2mm Extension - 20-0778

Radium Engineering Injector Seat Adapter 14mm to 17mm O-ring 2mm Extension

Radium Engineering Fuel Cell Subharness Kit for FCST-X (or FCST) - 20-0774

Radium Engineering Fuel Cell Subharness Kit for FCST-X (or FCST)

Radium Engineering VTA Competition Catch Can - L - 20-0772

This competition catch can features two inlet -10AN ORB ports and vents to atmosphere out of the top. Billet aluminum construction. L version. Fully serviceable. 0.6L capacity. Mounting bracket...

Radium Engineering VTA Competition Catch Can - XL - 20-0771

This competition catch can features two inlet -10AN ORB ports and vents to atmosphere out of the top. Billet aluminum construction. XL tall version. Fully serviceable. 0.9L capacity. Mounting bracket...

Radium Engineering V2 Quick Connect 19mm Male to 10AN Male Straight - 20-0758

Adapter fitting clips on to the valve cover vent fitting on the BMW B58 engine and converts to a 10AN male.

Radium V2 Quick Connect 19mm Male to 10AN Male 90 Degree - 20-0748

This swivel fitting installs into the BMW B58 valve cover found on the A90/A91 GR Toyota Supra. It allows connection of a 10AN hose.

Radium SAE Fuel Level Sender 0-90 ohm 11.7in - 20-0747-297

Fuel level sender with 0 (empty) to 90 (full) ohm output. 11.7" (297mm) probe length. Compatible with all fuel types. Output is in approximately 10 ohm increments. Designed for use with Radium Fuel...

Radium Engineering Distribution Block 12-10-10-10 With Fittings - 20-0737

High flow distribution block designed to work with large -10AN and -12AN lines. Can combine three lines into one. Safe for use with alternative fuels. Fittings included.

Radium Engineering Low-Profile Swivel Banjo Service Kit - 20-0723

O-ring service kit for Radium low-profile banjo fittings. Includes parts to service two fittings of each -4AN, -6AN, -8AN or -10AN sizes.

Radium S14/S15/R33/R34 Fuel Hanger Surge Tank Add-on F90000267/274/285 or E5LM - Pumps Not Included - 20-0701

This kit is added to a compatible Radium Nissan fuel pump hanger to convert it to a Fuel Hanger Surge Tank (FHST). This prevents fuel starvation from occurring during aggressive driving.

Radium S14/S15/R33/R34 Fuel Hanger Surge Tank Add-on For GSS342 Or AEM 50-1200 - Pumps Not Included - 20-0700

This kit is added to a compatible Radium Nissan fuel pump hanger to convert it to a Fuel Hanger Surge Tank (FHST). This prevents fuel starvation from occurring during aggressive driving.

Radium Quick Fill Dump Can 1.5in Dry Break - 20-0697-01

Molded 6 gallon dump can. Compatible with all types of fuel. Includes 1.5" dry-break filler probe and accessories. Semi-transparent white color.