AEM

AEM Replacement Pre-Filter for Fuel Pump(PN: 50-1200/1215/1220) - 50-1101

· 10 micron pre-filter which eliminates the need for a separate filter before pump

AEM 94-01 Integra Black Fuel Rail - 25-100BK

AEM High Volume fuel rails feature a 1/2-inch fuel bore to support fuel flow for applications up to 1,000 horsepower. This large bore also dampens backpressure pulses created by larger injectors and...

AEM Water/Methanol Injection Nylon Hose - 30-3314

-Can be used to add more length to existing system.

AEM Battery Management System Satellite (MUST BE USED WITH MASTER - 18 Cell Taps) - 30-8401S

The VCU communicates with the BMS via the Master Module and all battery packs need at least one Master unit. The Satellite Modules are connected to their Master via a high-speed serial interface...

AEM EV 400A HV Maintenance Switch - 30-8506

Hermetically sealed and gas filled. Intrinsically safe with industry leading dielectric performance.

AEM EV 600A HV Maintenance Switch - 30-8505

Hermetically sealed and gas filled. Intrinsically safe with industry leading dielectric performance.

AEM EV Contactor 350A/900V - 30-8503

Hermetically sealed with gas fill. Integrated coil economizer to reduce coil holding power. Meets RoHS 2011/65/EU.

AEM EV Pre Charge Relay - 30-8502

Low-cost pre-charge solution that meets RoHS 2011/65/EU. PCB mountable.

AEM EV Unsealed Battery Management System Satellite Module for VCU - 30-8408

The VCU communicates with the BMS via the Master Module and all battery packs need at least one Master unit. The Satellites expand the capability of the Master by an additional 18 cells and 3...

AEM EV Battery Management System Mini Master Module For VCU - 30-8407

The VCU communicates with the BMS via the Mini Master Module and all battery packs need at least one Mini Master unit. The Satellites expand the capability of the Master by an additional 18 cells and...

AEM EV CCU Kit - 30-8405

The AEM EV Combined Charging Unit (CCU) combines both an On-Board Charger (OBC) and a DC-DC Converter (DCDC). The OBC charges the HV Battery Pack by taking 120v or 240v AC energy from the grid,...

AEM EV SDU Controller Kit - 30-8403

AEM EV's Tesla Inverter Control Board acts as a VCU expansion device that replaces the stock Tesla ICB. Once connected to an AEM VCU using the supplied communications harness, calibrators can program...

AEM Battery Management System Master (MUST BE USED WITH AEM VCU - 18 Cell Taps) - 30-8401M

The VCU communicates with the BMS via the Master Module and all battery packs need at least one Master unit. The Satellites expand the capability of the Master by an additional 18 cells and 3...

AEM EV 8 Button Keypad CAN Based Programmable Backlighting - 30-8400

More than just aesthetics though, the backlighting is used to alert you to any potential issues and whether everything is functioning properly to keep you safe. For instance, when the Ignition switch...

AEM EV VCU300 Programmable Vehicle Control Unit 196-pin Connector 3 CAN 4-Motor Control - 30-8100

AEM EV Vehicle Control Units (VCUs) are the missing link for high-performance EV street-conversion and motorsports applications. They allow the calibrator to create customized torque management...

AEM VCU 275 Universal Tube - 30-8001

AEM's Vehicle Control Units (VCUs) are the missing link for high-performance EV street-conversion and motorsports applications. They allow the calibrator to create customized torque management...

AEM EV CCU Plug & Pin Kit - HVDC Output (For AEM EV CCU aem30-8405) - 30-3714

AEM EV CCU Plug & Pin Kit - HVDC Output (For AEM EV CCU aem30-8405)

AEM EV AC Input Connect for AEM EV CCU aem30-8405 - 30-3713

AEM EV AC Input Connect for AEM EV CCU aem30-8405

Replacement Connector Kit For BMS aem30-8401M and aem30-8401S - 30-3712

Replacement Connector Kit For BMS aem30-8401M and aem30-8401S

AEM EV Plug & Pin Kit for PDU-8 - 30-3711

· Includes dummy plugs for unused pin location to retain weather tight seal

AEM EV Plug & Pin Kit for VCU300 - 30-3710

· Multiple pins to allow for easy customization

AEM CD Carbon Dash 2-Button External Button Kit - 30-3610

This kit includes two waterproof buttons with flying leads that allow you to change pages on CD Flat Panel dashes and add steering wheel buttons to change pages on CD Carbon Dashes if you do not want...

AEM Power Harness for 30-0300 X-Series Wideband Gauge - 30-3459

· 3 different forms of communication, CAN, Analog, and Serial

AEM Main Harness for X-Series Temp Gauge (30-0302) - 30-3443

· Long length wiring loom to accommodate most applications