COMP Cams

COMP Cams Valve Guide Cutter For .500in - 4715CPG

Valve guide cutters available to cut guide to .425" - .446" - .494" - .500" - .530" - .625". Requires the use of an arbor/pilot, which are available for 5/16", 11/32" and 3/8" valve stem sizes.

COMP Cams Spring Locator 1.300in OD, .805in ID, .205in THICKNESS - 4683-1

Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4683 seat's 1.300" OD works well with our valve springs in ." guide...

COMP Cams ID Spring Locator 1.285in OD .805in ID, .135in Thickness - 4678-1

Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4678 seat's 1.285" OD works well with our 26918 beehive springs.

COMP Cams Cup Adjuster Screw Ultra Gold - 4660-16

Replacing the set screws that come with our Ultra-Gold ARC rockers, these set screws allow you to lock down the adjuster nuts on our Ultra-Gold ARC rocker arms.

COMP Cams Cup Adjuster Screw Ultra Gold - 4660-1

Replacing the set screw that comes with our Ultra-Gold ARC rockers, this set screw allows you to lock down the adjuster nut on our Ultra-Gold ARC rocker arms.

COMP Cams Bronze Gear F60 - 466

One of the first requirements when installing a Steel Roller cam is the addition of a bronze distributor Gear. A stock cast iron Gear is not compatible with a Steel Camshaft. COMP Cams Gears are...

COMP Cams Set ScrewsLS1 3/8-24 X .250 - 4654SS-16

These set screws replace the set screws that come with our adjustable Ultra Pro Magnum rocker arms for GM LS1/LS2/LS6 and LS3.

COMP Cams Bronze Gear C60 - 461

One of the first requirements when installing a Steel Roller cam is the addition of a bronze distributor Gear. A stock cast iron Gear is not compatible with a Steel Camshaft. COMP Cams Gears are...

COMP Cams Cam Lock Plate Chevy - 4605CPG

Prevent cam bolts from backing out at high RPM and load with our cam lock plate and bolt kit for Chevrolet Small and Big Block. Includes a plate with bendable locking tabs and high-strength bolts...

COMP Cams Rocker Arm Stud Kit - GM LS7/LT - 4587-KIT

By tying pairs of rocker arms together, COMP Cams has found a way to improve valve train dynamics, increase valve train stiffness and reduce deflection. The use of a tri-layer bushing instead of...

COMP Cams Studs Oldsmobile 3/8inX5/16in - 4542-16

COMP Cams takes pride in having the finest Rocker arm Studs available on the market. The High Energyâ„¢ and Magnum Series Studs work well in Applications with moderate lifts and spring pressures and...

COMP Cams Stud Oldsmobile 3/8inX5/16in - 4542-1

For applications with moderate lift and spring pressure, this High Energy stud has a 5/16" base thread and 3/8" rocker thread with a 1.520" effective stud length. Perfect for Oldsmobile applications.

COMP Cams Bronze Gear Oldsmobile W/MSD - 442

One of the first requirements when installing a Steel Roller cam is the addition of a bronze distributor Gear. A stock cast iron Gear is not compatible with a Steel Camshaft. COMP Cams Gears are...

COMP Cams Bronze Gear FS W/MSD .500in Sh - 438

One of the first requirements when installing a Steel Roller cam is the addition of a bronze distributor Gear. A stock cast iron Gear is not compatible with a Steel Camshaft. COMP Cams Gears are...

COMP Cams Bronze Gear FC/FF W/MSD .530in - 436

One of the first requirements when installing a Steel Roller cam is the addition of a bronze distributor Gear. A stock cast iron Gear is not compatible with a Steel Camshaft. COMP Cams Gears are...

COMP Cams Bronze Gear FS W/MSD .530in Sh - 435

One of the first requirements when installing a Steel Roller cam is the addition of a bronze distributor Gear. A stock cast iron Gear is not compatible with a Steel Camshaft. COMP Cams Gears are...

COMP Cams Camshaft Set 2018+ Ford Coyote 5.0L STG1 NST Thumper - 433700CPG

The Ford Coyote engine has proven itself as an awesome base for modifications since its debut in 2011, and COMP Cams now offers six different performance cam options that range from mild to wild for...

COMP Cams Bronze Gear FB - 433

One of the first requirements when installing a Steel Roller cam is the addition of a bronze distributor Gear. A stock cast iron Gear is not compatible with a Steel Camshaft. COMP Cams Gears are...

COMP Cams Bronze Gear FC/FF W/MSD .500in - 432

One of the first requirements when installing a Steel Roller cam is the addition of a bronze distributor Gear. A stock cast iron Gear is not compatible with a Steel Camshaft. COMP Cams Gears are...

COMP Cams Melonized Distributor Gear .468in Shaft Ford 302-351W - 431M

Melonized distributor Gears from COMP Cams are designed to provide universal compatibility for any Steel, cast iron or ductile iron Camshaft, but without the wear concerns of bronze options...

COMP Cams Bronze Gear FS W/MSD .467in Sh - 431

One of the first requirements when installing a Steel Roller cam is the addition of a bronze distributor Gear. A stock cast iron Gear is not compatible with a Steel Camshaft. COMP Cams Gears are...

COMP Cams Bronze Gear CRB/Crh W/MSD .48 - 424

One of the first requirements when installing a Steel Roller cam is the addition of a bronze distributor Gear. A stock cast iron Gear is not compatible with a Steel Camshaft. COMP Cams Gears are...

COMP Cams Bronze Gear CRS/Donovan W/MSD - 420

One of the first requirements when installing a Steel Roller cam is the addition of a bronze distributor Gear. A stock cast iron Gear is not compatible with a Steel Camshaft. COMP Cams Gears are...

COMP Cams Thumpr 227/241 Hydraulic Roller Cam - Oldsmobile 260-455 - 42-600-11

High performance street, stock converter ok, best with 2000+ converter and gears, choppy/thumping idle.