COMP Cams

COMP Cams Ss Valves LS1 Int 2.02in4.900in - 6039-8

COMP Cams Sportsman Stainless Steel Valves are available in a variety of diameters and stem lengths for Street/Competition engines. Made from 21-4N forged high-strength Steel alloy with 50 HRc...

COMP Cams Ss Valve LS1 Int 2.02in 4.900in - 6039-1

COMP Cams Sportsman Stainless Steel Valves are available in a variety of diameters and stem lengths for Street/Competition engines. Made from 21-4N forged high-strength Steel alloy with 50 HRc...

COMP Cams Valve Locks 3/8in 2 Groove - 602-16

lock angle and 3/8" valve stem size are a perfect replacement lock for stock engine rebuilds. They are recommended only for street Applications with lighter valve spring loads. It is critically...

COMP Cams Valve Locks 3/8in 2 Groove - 602-12

Hardened Steel Set of 12 - 7 Degree, 3/8", 2 Groove Street Locks for Chrysler

COMP Cams Valve Lock 3/8in Two Groove - 602-1

lock angle and 3/8" valve stem size are a perfect replacement lock for stock engine rebuilds. They are recommended only for street Applications with lighter valve spring loads. It is critically...

COMP Cams Valve Locks 5/16in Single Groove - 600-16

lock angle and 5/16" valve stem size is a perfect replacement lock for stock engine rebuilds. It is recommended only for street Applications with lighter valve spring loads. It is critically...

COMP Cams Valve Locks 5/16in Single Groove - 600-12

Hardened Steel Set of 12 - 7 Degree, 5/16", Single Groove Street Locks

COMP Cams Valve Lock 5/16in Single Groove - 600-1

lock angle and 5/16" valve stem size is a perfect replacement lock for stock engine rebuilds. It is recommended only for street Applications with lighter valve spring loads. It is critically...

COMP Cams Camshaft 272 V-TEC D16Z6 SOHC - 59500

59500 - CamShaft, 272 VTEC D16Z6 SOHC Honda

COMP Cams Tool SB Chevy LS1/LS6 Valve Spring - 5642

This COMP adjustable valve spring remover is constructed of billet aluminum for even the heaviest valve spring pressures. Fully adjustable, this tool accommodates Chevrolet LS rockers.

COMP Cams Switch Replacement For 5500 Vacuum Pump - 5500SW

COMP Cams Switch Replacement For 5500 Vacuum Pump

COMP Cams Relay Replacement For 5500 Vacuum Pump - 5500RE

COMP Cams Relay Replacement For 5500 Vacuum Pump

COMP Cams Bolt For L92 Camshafts - 5458

This bolt is 1.50" long with M16 diameter for GM L92 camshafts. This bolt is designed to prevent breakage, rated at 170,000 psi.

COMP Cams Spring Lock Tool GM Cam Phaser Limiter - 5455

Cam phasers are specially designed, computer-controlled Cam Gears that automatically optimize Camshaft timing based on the current engine rpm. Currently they are used in all 2005 and newer Ford...

COMP Cams Tool GM Cam Phaser - 5454

Cam phasers are specially designed, computer-controlled Cam Gears that automatically optimize Camshaft timing based on the current engine rpm. Currently they are used in all 2005 and newer Ford...

COMP Cams Cam Phaser Tool GM LT4 - 5451

This COMP Cams Cam Phaser Limiter Tool is used to help restrict Cam phaser motion for use of higher performance Camshafts in GM LT4 engines by allowing simultaneous compression of phaser springs in...

COMP Cams Tool Ford 3V Cam Phaser Spring - 5447

Cam phasers are specially designed, computer-controlled Cam Gears that automatically optimize Camshaft timing based on the current engine rpm. Currently they are used in all 2005 and newer Ford...

COMP Cams Tool Ford 3 Valve Cam Gear - 5446

Cam phasers are specially designed, computer-controlled Cam Gears that automatically optimize Camshaft timing based on the current engine rpm. Currently they are used in all 2005 and newer Ford...

COMP Cams Bronze Thrust Kit Factory LS E - 5400TP-KIT

Our thrust plate kit for GM LS engines features a bronze plate complete with o-rings and 4 bolts for a complete installation.

COMP Cams Custom Camshaft LS Gen III/IV NSR - 54-777-11

The COMP Cams No Springs Required Drift Cam is the first Camshaft specifically designed for 4.8/5.3 LS swapped drift, road Race and autocross cars. Along with major gains in power across the whole...

COMP Cams Stage 2 LST Camshaft GM LS Gen 3 / Gen 4 w/ 3-Bolt Blower - 54-337-11

Perfect choice for upgraded GM LS engines with larger displacement or larger blower Applications that include more Serious additional modifications for higher RPM and more power.

COMP Cams HRT Blower Stage 1 Hydraulic Roller Camshaft GM LS 3-Bolt Blower Engines - 54-335-11

Available in CK-Kit under CK54-335-11, Available in MK-Kit w/ 24X Timing Set under MK54-335-24, Available in MK-Kit w/ 58X Timing Set under MK54-335-58

COMP Cams Camshaft Chevrolet/GM LS1 & LS6 FSL Series - 54-103-11

50 State Legal grind for the GM Gen III LS1/LS2/LS3 3 bolt engines. Bolt in with stock components and tune, can produce 30+ HP increase in peak power. Carb EO: #D-279-13.

COMP Cams Tool SBC Valve Spring Compressor - 5337

Removing valve springs means working within a small space--a place where some tools are incapable of reaching. COMP Cams valve spring compressors enable you for effortless removal in these areas...