Ford Racing 24-25 Ford Mustang Dark Horse (Exl Handling pkg) 19x9.5in Sinister Bronze Wheel - M-1007-DHSB1995

Ford Racing 24-25 Ford Mustang Dark Horse (Exl Handling pkg) 19x9.5in Sinister Bronze Wheel

AWE Tuning 23-24 Toyota GR Corolla S-FLO Carbon Fiber Intake - 2660-15316

Upgrade your Toyota GR Corolla (1.6L) with the premium engineering of the AWE S-FLO Carbon Intake. Designed, engineered, and tested completely in-house at AWE's state-of-the-art facility, this pure bolt-on upgrade delivers maximum power gains of +7 hp...

AEM Replacement Filter for 50-1225 - 50-1103

10 micron pre-filter which eliminates the need for a separate filter before pump

AEM Cam Angle Sensor Disk for Nissan SR20DET RWD KA24DE (50mm OD) - 30-8760

AEM cam angle sensor discs are for use with AEM programmable engine management systems They are a direct replacement for the factory crank angle sensor disc in your Nissan. Before purchasing the 24 Nissan CAS sensor, be sure that the center of the AEM...

AEM EV VCU 275 LV Front Harness - 30-8604

This low voltage harness assembly was designed to be installed in the front half of the electric vehicle. It was designed to be used with a mating rear half assembly that is VCU hardware specific. The AEM part number for the mating rear half harness is...

AEM VCU 300 LV Front Harness - 30-8603

This low voltage harness assembly was designed to be installed in the front half of the electric vehicle. It was designed to be used with a mating rear half assembly that is VCU hardware specific. The AEM part number for the mating rear half harness is...

AEM EV Current Sensor - Dual Range - +/-75A/1000 - 30-8510

The AEM Dual Channel Hall-Effect Analog Current Sensor plays a critical role in EV drive systems. It's job is to measure current in and out of the vehicles High Voltage battery pack and report this data back to the VCU to be used for battery current...

AEM EV Current Sensor - Dual Range - +/-75A/750 - 30-8509

The AEM Dual Channel Hall-Effect Analog Current Sensor plays a critical role in EV drive systems. It's job is to measure current in and out of the vehicles High Voltage battery pack and report this data back to the VCU to be used for battery current...

AEM EV Contactor 500A/1500V - 30-8504

Hermetically sealed with gas fill. Integrated coil economizer to reduce coil holding power. Meets RoHS 2011/65/EU.

AEM EV 2500A Shunt Current Sensors - 30-8501

Overall, the Isabellenhutte IVT-S-2K5-U3-I-CAN2-12/24 is a versatile and reliable current sensor that is ideal for automotive EV applications. Its high accuracy, digital output, and rugged construction make it an excellent choice for demanding...

AEM EV 1000A Shunt Current Sensors - 30-8500

Overall, the Isabellenhutte IVT-S-1K-U3-I-CAN2-12/24 is a versatile and reliable current sensor that is ideal for automotive EV applications. Its high accuracy, digital output, and rugged construction make it an excellent choice for demanding...

AEM EV Tesla Sport Large Drive Unit Control Board (For Sport LDU Swaps Only) - 30-8410

AEM EV's Tesla Inverter Control Board acts as a VCU expansion device that replaces the stock Tesla ICB. Once connected to an AEM VCU using the supplied communications harness, calibrators can program propulsion strategies and characterize inputs through...

AEM EV CAN Logger - 30-8409

switch may be used to initiate logging. Unit connector is a DTM12 with a short flying lead terminated in a Type

AEM EV Tesla LDU Base Drive Inverter Control Board & Harness (MUST BE USED WITH VCU200) - 30-8402

AEM EV's Tesla Inverter Control Board acts as a VCU expansion device that replaces the stock Tesla ICB. Once connected to an AEM VCU using the supplied communications harness, calibrators can program propulsion strategies and characterize inputs through...

AEM EV Unsealed BMS Satellite Installation Kit - 30-3717

Supplied with PCB Connector, Terminals and Wiring leads

AEM EV Plug & Pin Kit for VCU275 - 30-3716

· Multiple pins to allow for easy customization

AEM Cable XS AEMNET - 30-3446

Power connection harness for our AEMNet gauge. Can be used to daisy-chain multiple gauges together on the same Bus.

AEM V2 5 Gallon Diesel Water/Methanol Injection Kit - Multi Input - 30-3351

Water/methanol injection for forced induction (turbocharged or supercharged) gas-powered race engines is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful detonation. This allows racers to reliably increase...

AEM V2 5 Gallon Diesel Water/Methanol Injection Kit (Internal Map) - 30-3301

The AEM Water/Methanol injection for forced induction (turbocharged or supercharged) Gas & Turbo Diesel applications is a proven means for effectively reducing engine inlet air temperatures and enhancing combustion efficiency whilst suppressing harmful...

AEM Adjustable Fuel Pressure Regulator Banjo Bolt - 25-635

AEM replacement parts for its adjustable fuel pressure regulators include a rebuild kit that includes a diaphragm, interchangeable discharge ports and O-ring, vacuum fitting and multiple barb fitting types.

AEM Fuel Pressure Regulator Barb Fitting - 25-611

AEM replacement parts for its adjustable fuel pressure regulators include a rebuild kit that includes a diaphragm, interchangeable discharge ports and O-ring, vacuum fitting and multiple barb fitting types.

AEM Adjustable Fuel Pressure Regulator Barb Fitting - 25-610

AEM replacement parts for its adjustable fuel pressure regulators include a rebuild kit that includes a diaphragm, interchangeable discharge ports and O-ring, vacuum fitting and multiple barb fitting types.

AEM Fuel Pressure Regulator Barb Fitting - 25-609

AEM replacement parts for its adjustable fuel pressure regulators include a rebuild kit that includes a diaphragm, interchangeable discharge ports and O-ring, vacuum fitting and multiple barb fitting types.

AEM High Volume Fuel Rail Port Plug - 25-604

AEM High Volume Fuel Rail replacement parts include aluminum crush washers, fuel rail O-rings, adjustable fuel pressure regulator O-rings, banjo fittings, and fuel rail plugs.