Engine Components

COMP Cams Camshaft FW XE256H-10 - 35-234-3

Fits Ford Small Block Engines originally equipped with "Old" firing order and 351 Windsor engines with the "Windsor" firing order

COMP Cams Camshaft FW X4 250H-11 - 35-231-3

Xtreme 4x4 206/214 Hydraulic Flat Tappet Cam for Ford 351W. Excellent torque and throttle response, good economy and low end power.This Part Fits:YearMakeModelSubmodel1981-1993FordBroncoCustom1985-1995FordBroncoEddie Bauer1981FordBroncoRanger...

COMP Cams Camshaft FW XE250H-10 - 35-230-3

Fits Ford Small Block Engines originally equipped with "Old" firing order and 351 Windsor engines with the "Windsor" firing order

COMP Cams Camshaft FW 280H-10 - 35-226-3

Fits Ford Small Block Engines originally equipped with "Old" firing order and 351 Windsor engines with the "Windsor" firing order

COMP Cams Camshaft FW 268H-10 - 35-218-3

High Energy 218/218 Hydraulic Flat Cam for Ford 351W. Moderate high performance street driving. Mild street machines, great for daily drivers. Noticeable idle.

COMP Cams Camshaft FW 260H-10 - 35-216-3

Fits Ford Small Block Engines originally equipped with "Old" firing order and 351 Windsor engines with the "Windsor" firing order

COMP Cams Camshaft FW 252H-10 - 35-215-3

Fits Ford Small Block Engines originally equipped with "Old" firing order and 351 Windsor engines with the "Windsor" firing order

COMP Cams Thrust Bearing Ford 289-351W - 3135TB

Eliminate wear at the front of your Ford 289-351W H.P. with our moly-coated roller thrust bearing. Our unique design is .142" thick and aids in setting the proper cam thrust clearance while eliminating gear to block wear.

COMP Cams Thrust Bearing Ford 289-351W - 3120TB

Eliminate wear at the front of your Ford 289-351 Windsor Block with our moly-coated roller thrust bearing. Our unique design is .142" thick and aids in setting the proper cam thrust clearance while eliminating gear to block wear.

COMP Cams Solid Lifters FS/FC/FF Perf S - 2910-16

These Performance Series solid lifters feature a precision-ground crown radius and surface finish, perfect for high-end street and race engines with higher spring pressures. For Ford 289-351W/C-400M and 429-460.

COMP Cams Solid Lifters FS/FC/FF Perf S - 2910-12

Performance Series Solid Lifter Set for Ford 6 Cylinder

COMP Cams Solid Lifter FS/FC/FF Perform - 2910-1

This Performance Series solid lifter features a precision-ground crown radius and surface finish, perfect for high-end street and race engines with higher spring pressures. For Ford 289-351W/C-400M and 429-460.

COMP Cams Valve Springs 1.415in Beehive - 26986-16

With a .575" maximum lift, these Beehive Valve Springs were designed for hydraulic or Solid flat tappet as well as hydraulic Roller cams. They work in a variety of small block engines. COMP Cams Beehive Valve Springs deliver increased valve train...

COMP Cams Valve Spring 1.415in Beehive - 26986-1

With a .575" maximum lift, these Beehive Valve Springs were designed for hydraulic or Solid flat tappet as well as hydraulic Roller cams. They work in a variety of small block engines. COMP Cams Beehive Valve Springs deliver increased valve train...

COMP Cams Valve Springs H/L Ford 4.6L/5.4L 2V/3V V8 - 26125-32

With a .650" maximum lift, these Beehive Valve Springs were designed for Ford 4.6L and 5.4L Modular 2 and 3 Valve engines and Duramax Applications.

COMP Cams Valve Spring H/L Ford 2V Beeh - 26125-16

With a .650" maximum lift, these Beehive Valve Springs were designed for Ford 4.6L and 5.4L Modular 2 and 3 Valve engines and Duramax Applications.

COMP Cams Valve Spring H/L Ford 2V 3V - 26125-1

With a .650" maximum lift, these Beehive Valve Springs were designed for Ford 4.6L and 5.4L Modular 2 and 3 Valve engines and Duramax Applications.

COMP Cams Valve Springs Ford 4.6L 2 Valve - 26113-16

With a .550" maximum lift, these Beehive Valve Springs were designed for Ford 4.6L and 5.4L Modular 2 and 3 Valve engines. COMP Cams Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less...

COMP Cams Valve Spring Ford 4.6L 2 Valve - 26113-1

With a .550" maximum lift, these Beehive Valve Springs were designed for Ford 4.6L and 5.4L Modular 2 and 3 Valve engines. COMP Cams Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less...

COMP Cams Finishing Kit Ford FF 1988-19 - 247

New line of Engine Finishing Kits from COMP Cams to include popular AMC, GM, Ford and Chrysler engine applications. When building an engine, many engine builders and "do-it-yourself" performance enthusiasts tend to focus on the major components such as...

COMP Cams Alum Ped MT Rocker Ford SB 1. - 19054-1

Constructed in the USA after FEA analysis, the Ultra Gold ARC rocker withstands up to 700 lbs pressure while improving power and stability. This 19054 rocker features a 1.7 ratio for use with 5/16" '77-'92 Ford 289 and 351 Windsor.This Part...

COMP Cams Rocker Arms Ultra Gold Arc FS - 19049-16

The original Ultra-Gold Aluminum Rockers changed the way racing and high performance street engine builders approached valve train design. Now, COMP Cams is revolutionizing valve train performance again with the next generation of Ultra-Gold ARC Series...

COMP Cams Rocker Arm Ultra Gold Arc FS - 19049-1

Manufactured entirely in the U.S.A., all Ultra-Gold ARC Series Aluminum Rocker Arms feature a spring oiler channel through the body for improved lubrication. Trunnion retaining clips have been replaced with an ultra durable spiral lock type clip, similar...

COMP Cams Rocker Arms Ultra Gold Arc FS - 19048-16

The original Ultra-Gold Aluminum Rockers changed the way racing and high performance street engine builders approached valve train design. Now, COMP Cams is revolutionizing valve train performance again with the next generation of Ultra-Gold ARC Series...