Engine Components

Edelbrock Two Piece Front Cover - 4242

Edelbrock part #4242 Small-Block Chevrolet (May require modification to cover axle pin on gear drive.) This die-stamped two-piece front cover for small-block Chevys is made from .090" aluminum for light weight and excellent strength. This attractive and...

Edelbrock Chevy B/B Front Cover - 4241

Edelbrock part #4241 Big-Block Chevrolet Our die-cast polished timing covers for Chevrolet come with pan seal, allen head bolts, gaskets, washers, and timing marker. #4240 won't fit 1987 & later; #4241 won't fit 1991 and later big-block Gen V & VI...

Edelbrock Chevy S/B Front Cover - 4240

Edelbrock part #4240 Small-Block Chevrolet Our die-cast polished timing covers for Chevrolet come with pan seal, allen head bolts, gaskets, washers, and timing marker. #4240 won't fit 1987 & later; #4241 won't fit 1991 and later big-block Gen V & VI...

Eagle Ford 5.4 H-Beam Connecting Rods (Set of 8) - CRS6657F3D

Eagle's commitment to quality and service has resulted in customer loyalty and satisfaction. This, in turn, has fueled rapid growth over the years. Eagle added crankshafts to our lineup a few years later as well as expanding our offerings in connecting...

COMP Cams Link Bar For .300 Tall Roller - 873-L

COMP Cams Roller Lifter Link Bars are precision-crafted from stainless Steel and wear-coated for a long life regardless of application.

COMP Cams Lifter FS OE-Type Hydraulic Roller Ful - 851-12

OE-style Hydraulic Roller Lifter for Ford 5.0L and Ford Flat Tappet Engines - Set of 12This Part Fits:YearMakeModelSubmodel2003FordE-150Base2003FordE-150 Club WagonChateau2003FordE-150 Club WagonXL2003FordE-150 Club WagonXLT1997-2002FordE-150...

COMP Cams Lifter FS OE-Type Hydraulic Roller Ful - 851-1

An excellent performance upgrade for OE-Roller Ford 5.0 engines, this non-link bar lifter offers decreased friction and increased durability. Can be retrofitted to non-roller Ford 289-302, 351W/C/M-400M using a Retro-Fit Hardware Kit.

COMP Cams 96-04 Ford Modular 4.6L-5.4L SOC Performance Lash Adjusters - Set of 16 - 84031-16

Lash adjusters in Ford Modular engines can leak down under high RPM, causing lost duration and lift, as well as increased valve train wear. The COMP Cams Ford Modular Performance Lash Adjusters are engineered to have a slower bleed down rate compared to...

COMP Cams Steel Retainers Ford 3.8L-4.2 - 786-16

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs. COMP Cams Steel Retainers are the perfect solution to this problem. COMP engineers used 3D CAD with FEA to design retainers with a modern and...

COMP Cams Steel Retainers Ford 3.8L-4.2 - 786-12

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs. COMP Cams Steel Retainers are the perfect solution to this problem. COMP engineers used 3D CAD with FEA to design retainers with a modern and...

COMP Cams Steel Retainers Eb Ford 3.8L- - 786-100

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs. COMP Cams steel retainers are precision machined from chromemoly steel and finished in black oxide. These precision retainers are specifically...

COMP Cams Pushrod Set 5/16 Magnum 7.150 - 7635-12

The Magnum 5/16" and 3/8" pushrods offer an affordable solution for your .080" wall chromemoly Pushrod needs. Designed to withstand the stresses of a high performance engine, these pushrods are heat-treated for extended durability and may be ordered as...

COMP Cams Pushrod 5/16 Magnum 7.150 - 7635-1

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs. Designed to withstand the stresses of a high performance engine, Magnum pushrods are head-treated for extended durability and have precision formed,...

COMP Cams Titanium Retainers For 3Valve - 702-24

it has to be since it is used on the U.S. Air Force F-117 Stealth Fighter. Other manufacturers purchase titanium from Metal brokers and produce "cheap" retainers, but COMP Cams titanium retainers will not deform. From a standing idle to the most extreme...

COMP Cams Titanium Retainer For 3-Valve - 702-1

no longer will you be preoccupied with splitting a retainer and tearing up an engine when turning 10,000 RPM.These COMP Cams titanium retainers are made from the finest 6AL4V alloy for maximum stiffness and minimal warpage. The 6AL4V alloy is...

COMP Cams Hi-Tech Gear Drive System Che - 4100

Precision machined, heat-treated billet Steel Gears for timing accuracy and durability. Unique design eliminates timing movement throughout the rpm range. Ready-to-install kit, including bolts and lock plate, ideal for street performance Applications...

COMP Cams Alum Timing Cover Chevy Big B - 312

The COMP Cams Three-Piece Billet Aluminum Timing Covers for Small and Big Block Chevrolet engines allow access to Camshaft timing adjustments without having to remove the harmonic damper of disturb the oil pan Seal. Designed to be lightweight yet rigid,...

COMP Cams Alum Timing Cover Chevy Small - 310

The COMP Cams Three-Piece Billet Aluminum Timing Covers for Small and Big Block Chevrolet engines allow access to Camshaft timing adjustments without having to remove the harmonic damper of disturb the oil pan Seal. Designed to be lightweight yet rigid,...

COMP Cams Valve Springs High Performance - 26918-12

With a .625" maximum lift, these Beehive Valve Springs were designed for hydraulic Roller cams in LS1, LS2 and LS6 engines. COMP Cams Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less...

COMP Cams Valve Spring High Performance - 26918-1

With a .625" maximum lift, these Beehive Valve Springs were designed for hydraulic Roller cams in LS1, LS2 and LS6 engines. COMP Cams Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less...

COMP Cams Valve Springs H/L Ford 3V Bee - 26125-24

With a .650" maximum lift, these Beehive Valve Springs were designed for Ford 4.6L and 5.4L Modular 2 and 3 Valve engines and Duramax Applications.

COMP Cams Valve Springs Ford 4.6L 2 Valve - 26113-32

Performance Street 1.061" OD Beehive Spring, 1.570" Installed Height, 32 Springs

COMP Cams Valve Springs Ford 4.6L 2 Valve - 26113-24

With a .550" maximum lift, these Beehive Valve Springs were designed for Ford 4.6L and 5.4L Modular 2 and 3 Valve engines. COMP Cams Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less...

COMP Cams Valve Spring Ford 4.6L 2 Valve - 26113-1

With a .550" maximum lift, these Beehive Valve Springs were designed for Ford 4.6L and 5.4L Modular 2 and 3 Valve engines. COMP Cams Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less...