Engine Components

COMP Cams Steel Retainer 1.437in - 768-1

Precision machined from chromemoly steel then black oxided, this 7 degree retainer is designed specifically for 11/32" valve engines with a 1.430"-1.460" outer diameter valve spring like our 942 single spring.

COMP Cams Pushrod Set FS 69-85 Non Roller - 7631-16

Heat-treated for guide plate compatibility then black oxide coated, these 6.900" long, 5/16" diameter, Magnum pushrods feature a durable, one-piece .080" wall construction for use in street performance and mild race applications.

COMP Cams Pushrod FS 69-85 Non Roller - 7631-1

Heat-treated for guide plate compatibility then black oxide coated, this 6.900" long, 5/16" diameter, Magnum pushrod features a durable, one-piece .080" wall construction for use in street performance and mild race applications.

COMP Cams Steel Retainers 1.437in-1.500in - 747-16

Precision machined from chromemoly steel then black oxided, these 10 degree retainers are designed specifically for 1.437"-1.500" O.D. valve springs such as our 942 valve springs.

COMP Cams Steel Retainer 1.437in-1.500in - 747-1

Precision machined from chromemoly steel then black oxided, this 10 degree retainer is designed specifically for a 1.437"-1.500" O.D. valve spring such as our 942 valve spring.

COMP Cams Steel Retainers 1.550in Triple - 746-16

Precision machined from chromemoly steel then black oxided, these 10 degree retainers are designed specifically for 1.500"-1.550" O.D. triple valve springs.

COMP Cams Steel Retainers 11/32in 1.437in - 743-12

Available individually under 743-1, in a set of 8 under 743-8 in a set of 16 under 743-16

COMP Cams Steel Retainers Eb 11/32in 1.4 - 743-100

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs. COMP Cams steel retainers are precision machined from chromemoly steel and finished in black oxide. These precision retainers are specifically...

COMP Cams Steel Retainer 11/32in 1.437in - 743-1

Precision machined from chromemoly steel then black oxided, this 7 degree retainer is designed specifically for 11/32" valve engines with a 1.437"-1.500" outer diameter valve spring like our 982, 990, 972, 901, 988 and 950 springs.

COMP Cams Steel Retainers 1.550in - 741-12

Available individually under 741-1, in a set of 8 under 741-8 in a set of 16 under 741-16

COMP Cams Steel Retainers Eb 1.550in - 741-100

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs. COMP Cams steel retainers are precision machined from chromemoly steel and finished in black oxide. These precision retainers are specifically...

COMP Cams Steel Retainers 1.437in - 740-16

Precision machined from chromemoly steel then black oxided, these 10 degree retainers are designed specifically 1.437"-1.500" O.D. valve springs.

COMP Cams Steel Retainer 1.437in - 740-1

Precision machined from chromemoly steel then black oxided, this 10 degree retainer is designed specifically for a 1.437"-1.500" O.D. valve spring.

COMP Cams Camshaft F23 280H - 70-131-6

Great power in mid-range and high RPM. Performance cam for street use.

COMP Cams Camshaft F23 268H - 70-127-6

Good all around street performance. Can be used in daily driver. Mid-range power.

COMP Cams Camshaft F23 260H - 70-123-6

High Energy 218/218 Hydraulic Flat Cam for Ford 2000-2300 4 Cylinder

COMP Cams Camshaft F23 252H - 70-119-6

Power and mileage increase in low to mid RPM range. Great for highway driving.

COMP Cams Camshaft F23 240H - 70-115-6

High Energy 201/201 Hydraulic Flat Cam for Ford 2000-2300 4 Cylinder

COMP Cams Super Valve Locks 11/32in - 611-16

Set of 16 - 10 Degree, 11/32", Single Groove Locks w/ Lash Cap Recess

COMP Cams Super Valve Locks Eb 11/32in - Set of 100 - 611-100

Ideal for use in race applications, our wider 10 degree angle locks better distribute increasing spring loads over the retainer more than typicaly 7 degree locks.

COMP Cams Super Valve Lock 11/32in - 611-1

10 Degree, 11/32", Single Groove Lock w/ Lash Cap Recess

COMP Cams Valve Locks 11/32in Single Groove - 601-16

Designed for milder, street applications, this set of 16, 7 degree lock angle valve locks are stamped then hardened for use with milder spring loads in applications with 11/32" diameter single groove valves.

COMP Cams Valve Lock 11/32in Single Groove - 601-1

Hardened Steel 7 Degree, 11/32", Single Groove Street Lock

COMP Cams Valve Seals 11/32in PTFE - 503-8

COMP's Positive Stop PTFE valve seals offer more clearance for dual springs with better sealing than o-ring or umbrella seals. These 503 seals have a .630" outer diameter and fit applications with 11/32" valves and .530" OD valve guides.