Ford

Metco Motorsports Supercharger Pulley Hub, with Hardware 07-12 GT500

Supercharger Pulley Hub, with Hardware 2007-2012 GT500 This is the pulley hub included with the popular Metco Motorsports 2.60" supercharger pulley.  This precision-machined pulley hub includes the (5) five stainless steel hub-to-pulley ring...

Metco Motorsports Heavy Duty Upper Control Arm Bracket 05-10 Mustang

Heavy Duty Upper Control Arm Bracket 2005-2010 Mustang and GT500 This new bracket is a direct replacement for the stock upper control arm bracket found on all 2005-2010 Mustangs.  It is made from high-grade laser cut steel that is CNC-bent and...

Metco Motorsports lower control arm set 05-14 Mustang

2005 - 2014 Ford Mustang, Shelby GT500 The Metco Motorsports high performance lower control arms for the new Mustang are CNC-machined from certified 6061-T6511 billet aluminum for unsurpassed strength and precision-fit.  The control arms...

Metco Motorsports Driveshaft Safety Loop 05-10 GT, 07-14 GT500

2005-2010 Mustang, 2007-2014 GT500  This front driveshaft loop is custom-designed to take advantage of existing mounting points on the vehicle and requires no drilling for installation.  The loop is made from heavy-duty steel that is laser-cut...

Metco Motorsports Supercharger Pulley Ring & Cover Kit 20-23 GT500

Supercharger Pulley Ring & Cover Kit (No Hub or Hardware) 2020 & Newer GT500 Once our supercharger pulley is installed on your GT500, a boost level change is as simple as changing the outer drive ring on the supercharger pulley. Listed below...

Metco Motorsports Supercharger Pulley Ring 07-12 GT500

Supercharger Pulley Ring (Ring Only) 2007-2012 Shelby GT500 These pulley rings are designed for use with Metco Motorsports two-piece supercharger pulleys.  If you already have a Metco supercharger pulley on your GT500, one of these rings is all that...

Metco Motorsports Auxiliary Idler Kit with Double-Bearing Idler Pulley 07-14 GT500

Auxiliary Idler Kit with Extreme Duty Double-Bearing Idler Pulley 2007-2014 GT500 Fits Eaton, Whipple, & VMP Gen II TVS Superchargers The Metco Motorsports auxiliary idler kit for the Shelby GT500 is cleverly engineered to be a simple bolt on and to...

Metco Motorsports GT500 Supercharger Pulley 13-14 GT500

2.40" Supercharger Pulley 2013-2014 Shelby GT500 Replace the original 2.7" supercharger pulley on your 2013 or 2014 GT500 and gain 1.5-2.5 lbs of additional boost. Our one-piece pulley is precision-machined from high-grade steel and then coated with a...

Metco Motorsports GT500 Supercharger Pulley 07-12 GT500

Supercharger Pulley Kit 2007-2012 GT500 One of our most popular products! Replace the original 3.00" supercharger pulley with one of our precision-made 2.60" supercharger pulleys to add boost to your GT500.  The kit includes a pulley hub machined...

Metco Motorsports Supercharger Pulley 20-23 GT500

Metco Motorsports is now offering a precision-made supercharger pulley upgrade for the 2020 and newer GT500! Like all Metco Motorsports pulleys, this pulley is an interchangeable unit that is based on a precision-machined, electroless nickel-plated steel...

Metco Motorsports Pulley Bearing, Metco Idler Pulleys

Replacement Bearing Assembly for Metco Motorsports Idler Pulley (Single and Double-Bearing) 6203 Style  This bearing is the same bearing originally installed in Metco Motorsports idler pulleys. It is a high-speed, high-load bearing manufactured by...

Metco Motorsports Driveshaft Safety Loop, 1979-2004 Mustang

1979-2004 Ford Mustang   Metco's one-piece driveshaft safety loop is custom-designed to fit the floor pan of the 1979-2004 Mustang application.  The ring is made from seamless DOM steel in an oversize dimension to accommodate lowered...

Metco Motorsports Pulley Bearing Cover

Bearing Cover Fits Metco Motorsports Billet Idler Pulleys This decorative bearing cover is designed to mount over any 90mm or 100mm Metco single-bearing idler pulley.  It installs easily using the supplied M8 x 1.25 x 30mm stainless steel...

Metco Motorsports Crank Idler Relocation Kit 03-04 Cobra

Crank Idler Relocation Kit 2003-2004 Mustang Cobra This kit is offered as a service part for the interchangeable crank pulley kits we manufacture for the Mustang Cobra (PN ICPCOBRA, listed elsewhere). This kit includes everything normally...

Metco Motorsports Supercharger Shaft End Cover

Supercharger Shaft End Cover 2003-2004 Mustang Cobra, 1999-2004 Lightning, 2007-2014 GT500 This clever piece attaches to the forward edge of the supercharger shaft in Modular Ford applications, and it adds a bit of flash to a very visible part of...

Metco Motorsports Supercharger Pulley Hub

Supercharger Pulley Hub (Hub Only) 1999-2004 Lightning, 2003-2004 Mustang Cobra This precision-machined steel press-on pulley hub is the same as the hub included with the Metco Motorsports interchangeable supercharger pulley kit for the Cobra &...

Metco Motorsports Heavy-Duty Tensioner Pulley

Heavy-Duty Tensioner Pulley For 2003-2004 Mustang Cobra, 1999-2004 Lightning, and Supercharged Harley-Davidson, with OEM Tensioner LIMITED AVAILABILITY - Please allow up to three weeks to ship   This pulley is designed to serve as a direct...

Metco Motorsports Tensioner Support Plate

Tensioner Support Plate Fits 2V & 3V Mustang, 2003-2004 Mustang Cobra, Lightning Original Metco Motorsports Design! This billet aluminum plate was designed as a solution to the problem of the factory Ford belt tensioner deflecting under load...

Metco Motorsports Custom Crank Pulley Hub for ATI Balancer 03-04 Cobra

Custom Crank Pulley Hub For 2003-2004 Mustang Cobra with ATI 918036 Balancer   This specially-machined crank pulley hub is designed for users of our ICPCOBRA interchangeable crank pulley kit who have equipped their Cobra with an ATI harmonic...

Metco Motorsports 76mm Idler Pulley

Billet Idler Pulley 76mm 8 or 10-Rib Drive Limited Availability  Like all Metco Motorsports idler pulleys, these pulleys are precision-machined from a single piece of certified 6061-T6 billet and then hard-coat anodized on the belt surface and rear...

Metco Motorsports 100mm Idler Pulley

Smooth Idler Pulley 100mm Select Modular Ford Applications, Including 2003-2004 Mustang Cobra, 1999-2004 Lightning, Supercharged Harley Davidson F150 Single-Bearing or Double-Bearing MIP-100, MIP-100D These billet idler pulleys are custom-sized at 100mm...

Metco Motorsports 90mm Idler Pulley

Smooth Idler Pulley 90mm Select Modular Ford Applications, Including 2003-2004 Mustang Cobra, 1999-2004 Lightning, Supercharged Harley Davidson F150 MIP-90, MIP-90D These billet idler pulleys are sized to match the popular 3.55" idler pulleys commonly...

Metco Motorsports Cobra 5-Piece Idler Kit 03-04 Cobra

Idler Pulley Set with Auxiliary Idler Bracket 2003-2004 Mustang Cobra Please allow 3-4 weeks from receipt of order to ship. This convenient kit is offered to simplify the process of outfitting your supercharged Cobra with complete set of heavy-duty idler...

Metco Motorsports Supercharger Pulley Ring

Supercharger Pulley Ring (Ring Only) 1999-2004 Lightning, 2003-2004 Mustang Cobra These pulley rings are designed for use with Metco Motorsports two-piece supercharger pulleys.  If you already have a Metco supercharger pulley on your Lightning or...