Shop Trucks

COMP Cams Valve Springs 1.437in Outer - 942-12

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. Selecting the right Metal stock and creating the best design...

COMP Cams Valve Spring 1.437in Outer W/D - 942-1

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. Selecting the right Metal stock and creating the best design...

COMP Cams Roller Lifters CSV-6-90 Degre - 897-12

Endure-X Solid Roller Lifters for Chevrolet 90∫ V6, .842" Diameter, (6) Centered/ (4) Left Offsets/ (2) Right Offsets - Set of 12

COMP Cams Pushrod Set XD-A GM LS 7.740-7.972in w/o Shims - 896807-16

A game-changing method for accurately setting lash or pre-load while using non-adjustable style rockers. The patent-pending system incorporates a smaller top section that slides two inches deep inside a larger bottom section. Length can then be adjusted...

COMP Cams Pushrod Set XD-A GM LS 7.320-7.552in w/o Shims - 896805-16

A game-changing method for accurately setting lash or pre-load while using non-adjustable style rockers. The patent-pending system incorporates a smaller top section that slides two inches deep inside a larger bottom section. Length can then be adjusted...

COMP Cams XD-A ADjustable Pushrod Shim Kit - 240pcs - 896801

Complete with 240 shims, this shim kit allows you to achieve the perfect pushrod length with your XD-A pushrods. This kit includes 16 shims per thickness measurement.

COMP Cams Lifter CS OE Drop-In Hydraulic Roller Set - 875-16

Reduced Travel OE-Style Hydraulic Roller Lifters. When dealing with full travel lifters, certain engines respond better to a light pre-load because it recovers more quickly from any bad harmonics in the valve train. Others work better with a heavy...

COMP Cams Lifter CS OE Drop-In Hydraulic Roller S - 875-1

Pro Magnum Hydraulic Roller Lifters Chevrolet Small block. For use in blocks originally equipped with hydraulic Roller cam. 1987 to present, and Gen III, LS1, LS2, and LS6. COMP Cams Pro Magnum Hydraulic Roller Lifters are specifically designed to...

COMP Cams Pro-Magnum Lifter FS/FC/FF - 862-16

Pro Magnum Hydraulic Flat Tappet Lifters. Specifications .875" Diameter - 105g Weight - 1.95" Seat Height. Specifically designed to perform at higher engine speeds. Proper position of internal piston at higher RPM prevents lifters from harmful "pumping...

COMP Cams Pro-Magnum Lifter FS/FC/FF - 862-1

This Pro Magnum lifter is designed to perform at higher RPM without any harmful pumping up. This lifter for Ford 231/240-300 6 cylinder, 289-351W, 351C/M-400M and 429-460 yields significant power increase over standard hydraulic lifters.

COMP Cams Lifter FS OE-Type Hydraulic Roller Ful - 851-16

OE-Style Hydraulic Roller Lifters (No Link Bar) are a performance replacement for stock hydraulic Roller lifters or retro-fit hydraulic Roller lifters for non-Roller blocks with necessary hardware. Decrease friction and increase longevity when compared...

COMP Cams Lifter FS OE-Type Hydraulic Roller Ful - 851-1

An excellent performance upgrade for OE-Roller Ford 5.0 engines, this non-link bar lifter offers decreased friction and increased durability. Can be retrofitted to non-roller Ford 289-302, 351W/C/M-400M using a Retro-Fit Hardware Kit.

COMP Cams Lifter SB/Lt/LS OE-Type Hydraulic Roller Full Trv - 850-16

OE-Style Hydraulic Roller Lifters (No Link Bar) are a performance replacement for stock hydraulic Roller lifters. They decrease friction and increase longevity when compared to flat tappet lifters. Accept much more aggressive Cam profiles than flat...

COMP Cams Link Bar For FS/LS1 Roller Li - 838-L

COMP Cams Roller Lifter Link Bars are precision-crafted from stainless Steel and wear-coated for a long life regardless of application.

COMP Cams Roller Lifters FS - 838-16

Best all around lifters for Ford 289-351W, perfect for any application with no offsets, 289 and 302 require cylinder head removal to install, Solid body with oil bad, set of 16 lifters

COMP Cams Roller Lifter FS - 838-1

Best all around lifter for Ford 289-351W, perfect for any application with no offsets, 289 and 302 require cylinder head removal to install, Solid body with oil bad, single lifter

COMP Cams Solid Lifters Ford V8/SBC - 833-16

Solid/Mechanical Flat Tappet Lifters (16) Designed and manufactured using the tightest tolerances in the industry for ultra-precise construction. Oil metering band is milled to exact depth to prevent too much oil from being delivered to the top of the...

COMP Cams Hydraulic Lifters FS FC FF - 832-16

High Energy Hydraulic Flat Tappet Lifters. Specifications .875" Diameter - 105g Weight - 2.02" Seat Height. Patented orifice metering valve precisely meters oil to the Rocker arms. Continuous contact between the metering valve and Pushrod seat is...

COMP Cams Hydraulic Lifter FS FC FF - 832-1

With a patented orifice metering valve and a lightweight check valve disc these High Energy hydraulic flat lifters for Ford 240-300/231 V6, 289-351W, 351C-400M and 429-460 provide quicker response and better performance.

COMP Cams Pushrods Hi-Tech 5/16in 8.250in - 8319-16

COMP Cams Hi-Techâ„¢ Oil Restricting pushrods feature 0.050" oil holes, which are half the size of standard Hi-Techâ„¢ pushrods. These pushrods maintain the consistent Hi-Techâ„¢ Pushrod features, including one-piece 4130 chromemoly, heat-treated steel...

COMP Cams Pushrod Hi-Tech 5/16in 8.250in - 8319-1

COMP Cams Hi-Techâ„¢ Oil Restricting pushrods feature 0.050" oil holes, which are half the size of standard Hi-Techâ„¢ pushrods. These pushrods maintain the consistent Hi-Techâ„¢ Pushrod features, including one-piece 4130 chromemoly, heat-treated steel...

COMP Cams Pushrods Hi-Tech 5/16in 8.200in - 8318-16

With .050" oil holes on the ends, these Hi-Tech 5/16" one piece 8.200" long pushrods feature an .080" wall thickness and restricts oil flow to the top end of the valvetrain.

COMP Cams Pushrod Hi-Tech 5/16in 8.200in - 8318-1

With .050" oil holes on the ends, this Hi-Tech 5/16" one piece 8.200" long pushrod features an .080" wall thickness and restricts oil flow to the top end of the valvetrain.

COMP Cams Pushrods Hi-Tech 5/16in 8.100in - 8316-16

With .050" oil holes on the ends, these Hi-Tech 5/16" one piece 8.100" long pushrods feature an .080" wall thickness and restricts oil flow to the top end of the valvetrain.