AEM

AEM Universal High Output Inductive Dumb Coil - 30-2852

Any enthusiast running boost, nitrous or high RPMs is aware of the trade-offs associated with inductive coils versus converting to a capacitive-type discharge ignition system (CDI). While inductive...

AEM 1 Channel Coil Driver Accessory - 30-2843

Swapping to a coil-on-plug ignition set-up can eliminate dwell time issues that can be problematic in stock ignition systems, and AEM's Ignition Coil Drivers are the most affordable way to drive...

AEM 4 Channel Coil Driver - 30-2840

Swapping to a coil-on-plug ignition set-up can eliminate dwell time issues that can be problematic in stock ignition systems, and AEM's Ignition Coil Drivers are the most affordable way to drive...

AEM CD-5 Carbon Digital Dash Display - 30-5600

CD-5 Carbon Digital Dash Displays feature a full-color, daylight readable screen surrounded by a tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of...

AEM 52mm Boost Digital Gauge -30-50psi - 30-4408

· Included brass sensor adapters, vacuum hose, and T-fittings for remote installation

AEM 52mm Oil Pressure 150psi Digital Gauge - 30-4407

AEM Digital Oil Pressure Gauges combine unsurpassed accuracy, speed and control with an easy-to-read digital LED interface that displays oil pressure in 1 PSI increments, and a sweeping LED "needle"...

AEM 52mm Boost Digital Gauge -30-35psi - 30-4406

AEM's Digital Boost Display Gauges combine unsurpassed accuracy, speed and control with an easy-to-read digital LED interface that displays boost in 1 PSI increments, and a sweeping LED "needle" that...

AEM 52mm Temperature (Transmission / Oil / Water) Digital Gauge - 30-4402

The AEM Digital Oil/Trans/Water Temperature Gauge combines unsurpassed accuracy, speed and control with an easy-to-read digital LED interface that displays temperature in 1 degree increments, and a...

AEM 52mm Pressure (Oil or Fuel) Digital Gauge - 30-4401

AEM's digital oil pressure gauges include a 0-5v analog output for use with data loggers and virtually any engine management system, such as the Infinity ECU, Series 2 EMS or AQ-1 Data Logger, making...

AEM 52mm Voltmeter Digital Gauge - 30-4400

The AEM Digital Voltmeter Gauge combines unsurpassed accuracy, speed and control with an easy-to-read digital LED interface that displays voltage in 1 volt increments, and a sweeping LED "needle"...

AEM Digital Wideband UEGO Gauge w/o Sensor - 30-4110NS

Accurate AFR data is critical when tuning an engine. Running rich (very low air/fuel ratio, excessive fuel) can cause a loss in power, while running too lean (very high air/fuel ratio, not enough...

AEM Digital Wideband UEGO Gauge - 30-4110

AEM's legendary Digital Wideband O2 AFR UEGO Gauge is a wideband UEGO air/fuel ratio controller (AFR) and gauge in one. It unites accuracy, speed and control with an easy to read, digital LED display...

AEM Universal Stainless Tall Manifold Bung Install Kit - 30-4008

AEM's stainless-steel tall wideband UEGO sensor bungs are designed specifically for use on forced induction applications using the 4-Channel Wideband UEGO Controller, but can be used for wideband...

AEM V3 Water/Methanol Injection Kit - Multi Input (NO Tank) - 30-3352

Racers with high compression naturally aspirated engines or boosted engines who are looking for an alternative to boost-dependent water/methanol injection controllers have a solution in AEM's...

AEM V3 One Gallon Water/Methanol Injection Kit - Multi Input - 30-3350

Boost Dependent and Multi-Input (0-5v/frequency) progressive controller designs feature large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test...

AEM Water/Methanol Injection System - High-Flow Low-Current WMI Solenoid - 200PSI 1/8in-27NPT In/Out - 30-3326

The AEM Water/Methanol Solenoid is a 2-way, normally closed 12V valve with stainless steel body for use with AEM Water/Methanol Injection Systems. The shut-off valve provides an accurate and...

AEM V2 Water / Methanol 1.15 Gallon Methanol Injection Tank - 30-3325

The new controller designs feature large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, with covered status LED and test buttons for added splash...

AEM Wiring Harness for V2 Controller w/ Multi Input - 30-3324

Wiring Harness for V2 Water/Methanol injection Controller with Multi Input Features

AEM V2 5 Gal Tank Kit w/ Conductive Fluid Level Sensor - 30-3320

V2 Water/Methanol Injection 5 Gallon Tank Kit with Conductive Fluid Level Sensor

AEM V3 Water Extra Nozzle Kit - 30-3315

Our breakthrough injector design uses unique Swirl Generator Technology that improves atomization to deliver faster inlet temp cooling and uses less fluid to maintain inlet air cooling. We include...

AEM V3 Water/Methanol Injection Nozzle Only Kit (Qty 2) - 30-3313

Replacement V3 Water/Methanol Injectors (Qty 2), Includes Interchangeable Swirl Generators for 250cc, 500cc, & 1000cc of flow for each injector

AEM V2 HD Controller Kit - Internal MAP w/ 40psi Max - 30-3306

V2 Water/Methanol HD Controller Kit - Internal MAP with 40psi max, CONTROLLER ONLY

AEM V2 Multi Input Controller Kit - 0-5v/MAF Freq or V/Duty Cycle/MAP - 30-3305

V2 Water/Methanol Multi Input Controller Kit- 0-5v/MAF Frequency or Voltage/Duty Cycle/Ext MAP, CONTROLLER ONLY

AEM V3 Standard Controller Kit - Internal MAP w/ 35psi Max - 30-3304

The new controller designs feature large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, with covered status LED and test buttons for added splash...