AEM

AEM V3 Water/Methanol Injection Kit - NO TANK (Internal Map) - 30-3302

Water/methanol injection for forced induction (turbocharged or supercharged) gas-powered race engines is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful...

AEM V3 1 Gallon Water/Methanol Injection Kit (Internal Map) - 30-3300

These new controllers retain the "Boost Safe" injection failsafe system, which is an output that will activate if there is a short, loss of continuity or high or low voltage or low fluid condition,...

AEM Water/Methanol Injection 200psi Recirculation Pump - 30-3018

Water/Methanol Injection 200psi Recirculation Pump w/ 3/8 -inch NPT Fittings

AEM Water / Methanol Injection 6-Amp Recirculation-Style Pump 200psi for One-Gallon Kit **replacemen - 30-3015

If part of your existing AEM Water/Methanol Injection system has become damaged, we offer all of the component parts individually, including our 200 PSI water/methanol injection pump, a WMI check...

AEM Water / Methanol Inline Injection Filter - 30-3003

The AEM Water Injection Kit is a safe and economical way to reduce air inlet temperatures to increase boost pressure for more power. Lower air inlet temperatures allow users to advance timing without...

AEM No-Weld O2 Sensor Mount for 2.75 to 3 inch Diameter Pipe - 30-2355-300

No welding equipment? No problem with AEM's No-Weld O2 Sensor Mounts. These mounts have an integrated bung that makes it easy to install a wideband UEGO air/fuel ratio sensor using just a drill and...

AEM No-Weld O2 Sensor Mount for 2.25 to 2.5 inch Diameter Pipe - 30-2355-250

No welding equipment? No problem with AEM's No-Weld O2 Sensor Mounts. These mounts have an integrated bung that makes it easy to install a wideband UEGO air/fuel ratio sensor using just a drill and...

AEM No-Weld O2 Sensor Mount for 1.75 to 2.0 inch Diameter Pipe - 30-2355-200

No welding equipment? No problem with AEM's No-Weld O2 Sensor Mounts. These mounts have an integrated bung that makes it easy to install a wideband UEGO air/fuel ratio sensor using just a drill and...

AEM Universal Exhaust Back Pressure Sensor Install Kit - 30-2064

AEM's Exhaust Backpressure install kit is specifically designed for use with AEM's 4-Channel Wideband UEGO Controller to provide accurate air/fuel ratio readings from wideband O2 sensors that are...

AEM Universal 1/8in NPT Air Intake Temp Sensor Kit w/ Deutsch Style Connector - 30-2014

Air Temperature Sensor DTM-Style Kit, Includes 1/8-inch NPT Air Temperature Sensor with High Performance DTM-Style Connector, Aluminum Bung, Connector and Pins

AEM Universal 1/8in PTF Water/Coolant/Oil Temperature Sensor Kit w/ Deutsch Style Connector - 30-2013

AEM offers 1/8" NPT DTM-Style Connector(PN 30-2013), 1/8" NPT (PN 30-2012) and 3/8" NPT (PN 30-2011) water/oil temperature sensor kit. Find the specifications of our fluid temperature sensors below...

AEM Universal 1/8in PTF Water/Coolant/Oil Temperature Sensor Kit - 30-2012

AEM offers 1/8" NPT DTM-Style Connector(PN 30-2013), 1/8" NPT (PN 30-2012) and 3/8" NPT (PN 30-2011) water/oil temperature sensor kit. Find the specifications of our fluid temperature sensors below.

AEM Inlet Air Temperature Sensor Kit for EMS - 30-2010

Thermal Time Constant: < 15 sec. The time required for the sensor to achieve 63.2% of its steady state value when subjected to a step change in ambient temperature [Tc=(Tf-Ti)*63.2%+Ti]. Test medium:...

AEM Universal EMS Wideband 02 Kit Sensor/ Bung/ Connector/ Wire-Seals/ Pins - 30-2002

Bosch LSU 4.2 Wideband UEGO Installation Kit, Includes: Bosch LSU 4.2 Wideband UEGO Sensor, Weld-On Bung, Connector, Wire-Seals and Pins

AEM X-Series Tru-Boost Controller Gauge w/ Boost Control Solenoid 80PSIg Internal MAP Sensor - 30-0352

All AEM Tru-Boost gauge programming is done using the faceplate buttons and no laptop is required. AEM's specially designed Boost Control Solenoid and all necessary hardware is included.Program Two...

AEM X-Series OBDII Wideband UEGO AFR Sensor Controller Gauge - 30-0334

Accurate AFR data is critical when tuning an engine. Running rich (very low air/fuel ratio, excessive fuel) can cause a loss in power, while running too lean (very high air/fuel ratio, not enough...

AEM X-Series AEMnet Can Bus Gauge Kit - 30-0312

The AEMnet CAN bus gauge connects to AEMnet-equipped devices through a 4-pin DTM connector and displays data in either US or Metric units. View multiple data channels from an Infinity ECU, Series 2...

AEM X-Series OBDII Gauge Kit - 30-0311

AEM's X-Series OBDII gauge (PN 30-0311) puts multiple channels of data at your fingertips by reading the CAN bus stream of your vehicle's OBD port and transmitting those channels to the gauge display...

AEM X-Series Inline Wideband UEGO Controller - 30-0310

When tuning an engine using wideband AFR feedback control on an inertia dyno, deadtime affects the data you are looking at because it is reported in a different operating location than when it...

AEM X-Series Pressure 0-15psi Gauge Kit - 30-0309

X-Series Digital Gauges include new technological features that make them easier to use. Two buttons on the faceplate deliver programmability for peak/recall, standard or metric center LED readout...

AEM X-Series Boost Pressure -30inHg 60psi Gauge Kit - 30-0308

X-Series Digital Gauges include new technological features that make them easier to use. Two buttons on the faceplate deliver programmability for peak/recall, standard or metric center LED readout...

AEM X-Series 0-150 Oil Pressure Gauge Kit - 30-0307

AEM's 30-0307 X-Series 150 PSI/10 BAR Digital Oil Pressure gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly...

AEM X-Series Boost Pressure -30inHg 35psi Gauge - 30-0306

X-Series Digital Gauges include new technological features that make them easier to use. Two buttons on the faceplate deliver programmability for peak/recall, standard or metric center LED readout...

AEM X-Series EGT 0-1800F Gauge - 30-0305

X-Series Digital Gauges include new technological features that make them easier to use. Two buttons on the faceplate deliver programmability for peak/recall, standard or metric center LED readout...