Ford

COMP Cams Camshaft FS 306S-10 - 31-336-4

An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts. Ideal for use with higher compression ratio engines...

COMP Cams Camshaft FS 294S-10 - 31-335-4

Great for street/strip. 4 speed or automatic with 3500+ stall. Intake, headers, low gears, very rough idle, 10:1 compression.

COMP Cams Camshaft FS 282S-10 - 31-334-4

Performance cam for street machines. Lower axle ratio and 2500+ stall with headers. Rough idle. Magnum Muscle Camshaft for 289c.i. 1965-68, factory 271 HP.

COMP Cams Camshaft FS 270S-10 - 31-333-4

An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts. Ideal for use with higher compression ratio engines...

COMP Cams Camshaft FS 305H-10 - 31-331-4

Limited street use or bracket race. 11:1 compression, intake and exhaust. Radical idle. Good for 4 speed or 3500+ stall, 10.5:1+ compression.

COMP Cams Camshaft FS 292H-10 - 31-330-3

Hydraulic: Street/strip use. 3500 stall or 4 speed, 4.10 Gear and 10.5:1 compression. Very rough idle.

COMP Cams Camshaft FS XE294H-10 - 31-254-4

Pro Street/bracket, good intake, headers, gear, 3300+ stall.

COMP Cams Camshaft FS XE284H-10 - 31-250-4

Xtreme Energy 240/246 Hydraulic Flat Tappet Cam for Ford 221-302 street/strip Applications.

COMP Cams Camshaft FS XE274H-10 - 31-246-3

Xtreme Energy 230/236 Hydraulic Flat Tappet Cam for Ford 221-302. Very strong torque and throttle response. 2500+ Stall.

COMP Cams Camshaft FS XE268H-10 - 31-242-3

Xtreme Energy 224/230 Hydraulic Flat Tappet Cam for Ford 221-302. Great for street machines. 2200+ Stall.

COMP Cams Camshaft FS XE262H-10 - 31-238-3

Xtreme Energy 218/224 Hydraulic Flat Tappet Cam for Ford 221-302. Excellent response, good mid-range, stock converter, 3.23-4.10 Gear.

COMP Cams Camshaft FS XE256H-10 - 31-234-3

Xtreme Energy 212/218 Hydraulic Flat Tappet Cam for Ford 221-302. Strong torque through low and mid-range with a good idle.

COMP Cams Camshaft FS XE250H-10 - 31-230-3

Xtreme Energy 206/212 Hydraulic Flat Tappet Cam for Ford 221-302. Very strong torque and excellent mileage with a smooth idle.

COMP Cams Camshaft FS 280H-10 - 31-226-3

Broad power. 2500+ stall, low gears, 9.5:1 compression and headers. Rough idle. Off shore type boat. Strong performance, rough idle.

COMP Cams Camshaft FS 268H-10 - 31-218-2

Good for daily driven performance vehicles. Mid-range power. Slightly lower gears. Mild rough idle. Single or dual engines. Best for inboard/outboard. Noticeable idle.

COMP Cams Camshaft FS 260H-10 - 31-216-2

Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications...

COMP Cams Camshaft FS 252H-10 - 31-215-2

High Energy 206/206 Hydraulic Flat Cam for Ford 221-302 Hydraulic: Good for low RPM torque in 289-302. Good towing in 302 automatic. Smooth idle.

COMP Cams Camshaft FS 240H-8 - 31-115-4

High Energy 192/200 Hydraulic Flat Cam for Ford 221-302. 289 Engine with automatic, stock Gears. Good torque and economy, very smooth idle.

COMP Cams Solid Lifters FS/FC/FF Perf S - 2910-16

These Performance Series solid lifters feature a precision-ground crown radius and surface finish, perfect for high-end street and race engines with higher spring pressures. For Ford 289-351W/C-400M and 429-460.

COMP Cams Solid Lifters FS/FC/FF Perf S - 2910-12

Performance Series Solid Lifter Set for Ford 6 Cylinder

COMP Cams Solid Lifter FS/FC/FF Perform - 2910-1

This Performance Series solid lifter features a precision-ground crown radius and surface finish, perfect for high-end street and race engines with higher spring pressures. For Ford 289-351W/C-400M and 429-460.

COMP Cams Die Cast Valve Cover Set SBf W - 282

Manufactured and packaged in the U.S.A., this new line of powder coated die cast aluminum valve covers will offer you a sleek, high performance look combined with rigid durability and unmatched reliability. They are a perfect addition to any high...

COMP Cams Valve Springs 1.415in Beehive - 26986-16

With a .575" maximum lift, these Beehive Valve Springs were designed for hydraulic or Solid flat tappet as well as hydraulic Roller cams. They work in a variety of small block engines. COMP Cams Beehive Valve Springs deliver increased valve train...

COMP Cams Valve Spring 1.415in Beehive - 26986-1

With a .575" maximum lift, these Beehive Valve Springs were designed for hydraulic or Solid flat tappet as well as hydraulic Roller cams. They work in a variety of small block engines. COMP Cams Beehive Valve Springs deliver increased valve train...